user manual

150 DX-700 • User’s Guide • Rev 02
4. Operation
DX-700 Management Menu Operations
rëáåÖ=íÜÉ=jçåáíçê=lìíéìí=jÉåì
The DX-700 provides two identical monitor outputs, one each in RGB and DVI formats.
Both outputs show the same video. The
Monitor Output Menu enables you to set the
format of your system’s monitor, select the monitor video (either an individual output or the
entire bank), and display a test pattern and/or raster box on the monitor.
 Use the following steps to manage the monitor.
1. From the Home Menu, press {DX-700 Management}.
2. Press {Monitor Setup} to display the Monitor Output Menu.
Figure 4-88. Monitor Output Menu (sample)
3. To change the monitor output format, highlight the desired format in the list and
press
{Apply}.
4. To place a test pattern (and/or raster box) on the monitor, press {Test Pat} to
display the
Monitor Test Pattern Menu. Refer to the “Using the Test Pattern
Menu” section on page 148 for details. The menus are identical.
Press
{Previous} to return to the Monitor Output Menu.
Note
Prior to exiting the Monitor Test Pattern Menu, it is
recommended that you select
{None} to restore the previous
video on your monitor.