user manual

18 DX-700 • User’s Guide • Rev 02
NK==fåíêçÇìÅíáçå
About the DX-700
kÉï=cÉ~íìêÉë
The following topics are discussed in this section:
• Firmware Version 2.10 Features
• Firmware Version 2.30 Features
cáêãï~êÉ=sÉêëáçå=OKNM=cÉ~íìêÉë
The following features and functions were implemented in firmware version 2.10:
• External Stacking — This mode enables multiple DX-700 units to be joined
together to increase the overall canvas size, either horizontally or vertically. For
details, refer to the “E
xternal Stacking” section on page 26.
• Cross-bank Stacking — This mode enables multiple banks to be connected
together within a single DX-700 chassis, using the expansion links on an input
module. Cross-bank stacking supports synchronizing inputs in multiple banks.
For more information, refer to the “Cross-bank Stacking
” section on page 26.
• Input Formats — The following additional input formats are now detected:
~ 1920 x 1080pSF @ 30 and 29.97
~ 1280 x 720 @ 60
~ 1280 x 800 @ 60
~ 1360 x 768 @ 60
~ 1440 x 900 @ 60, 75 and 85
~ 1680 x 1050 @ 60
• Autosave — a check box has been added on the Expert Menu to turn the
Autosave mode on or off. In Chapter 4, refer to the “Using the Expert Menu”
section on page 158.
• Tiles and Modules — Support has been added for the following LED tiles and
modules:
~ TF-20
~ T-20
~ I6 BK
• Apply Over Black — On the Preset Recall Menu, an Apply over Black
checkbox has been added. In Chapter 4, refer to the “Preset Management
Operations” section on page 104.
• Z-Order Support — On the Input Management Menu, support has been added
for Z-Order. In Chapter 4, refer to the “I
nput Management Menu Operations”
section on page 109.
• Luma Keying — The luma keying function has been implemented for control by
Director Toolset only. Refer to the “Director Toolset User’s Guide.”
• Input Sharpness — On Image Processing Tab 1 (I.P. 1), a sharpness
adjustment has been implemented. In Chapter 4, refer to the “Adjusting Image
Processing Parameters” section on page 115.
• Cable Equalization — On Image Processing Tab 1 (I.P. 1), a cable equalization
adjustment has been implemented. In Chapter 4, refer to the “Adjusting Image
Processing Parameters” section on page 115.
• Soft Reset — Users can now perform both Factory and Soft system resets. In
Chapter 4, refer to the “R
esetting the System” section on page 145 for details.