user manual

196 DX-700 • User’s Guide • Rev 02
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
DX-700 Remote Command List
~ H: Horizontal [ 0 | 1 ] .. 0 = OFF, 1 = ON
~ V: Vertical [ 0 | 1 ] .. 0 = OFF, 1 = ON
~ DE: Data Enable [ 0 | 1 ] .. 0 = OFF, 1 = ON
S Example: FIBERFILTER | 1 | 3 | 0
• Query format: FIBERFILTER? | Bank | Out
• Query returns: H | MinH | MaxH | V | MinV | MaxV | DE | MinDE | MaxDE
~ H: Horizontal
~ MinH: Min Horizontal
~ MaxH: Max Horizontal
~ V: Vertical
~ MinV: Min Vertical
~ MaxV: Max Vertical
~ DE: Data Enable
~ MinDE: Min Data Enable
~ MaxDE: Max Data Enable
S Example: FIBERFILTER? | 2 | 1
1 | 0 | 1 | 0 | 0 | 1 | 1 | 0 | 1
cf_bopk
• Description: Query Fiberlink serial number
• Set format: n/a
• Query format: FIBERSN? | Bank | Out | Index | Type
~ Bank: Bank ID 1 – 3
~ Out: Output ID 1 – 6
~ Index: Fiberlink index (starts from 1; 0 is not supported)
~ Type: Fiberlink type (0 = Fiberlink Tx; 1 = Fiberlink Rx)
• Query returns: Serial number
S Example: FIBERSN? | 2 | 1 | 1 | 0
837564
cf_bom`_
• Description: Query Fiberlink PCB ID
• Set format: n/a
• Query format: FIBERPCB? | Bank | Out | Index | Type
~ Bank: Bank ID 1 – 3
~ Out: Output ID 1 – 6
~ Index: Fiberlink index (starts from 1; 0 is not supported)
~ Type: Fiberlink type (0 = Fiberlink Tx; 1 = Fiberlink Rx)
• Query returns: PCB ID