user manual

50 DX-700 • User’s Guide • Rev 02
2. Hardware Orientation
DX-700 Rear Panel
In Appendix A, refer to the “NNI Connector” section on page 184 for pinout
information.
Warning
The HDMI-type connectors on the NNI Output Module use
proprietary signals and pinouts.
Do not connect the output of an NNI Output Module to
anything other than the input of a Barco NNI LED tile. Even
though the connector is an HDMI-type connector, it is not an
HDMI signal, and serious damage could result if, for example,
the output was plugged into an HDMI monitor.