user manual

84 DX-700 • User’s Guide • Rev 02
4. Operation
Using the Setup Wizard
The Setup Wizard Initial Menu appears.
Figure 4-8. Setup Wizard: Initial Menu (sample)
This menu reminds you to verify all of your data, power and processor
connections. At the top of the menu, the label
Bank: [n] indicates the bank on
which you are configuring outputs.
6. Press {Next}. The system discovers the system configuration, including all input
and output modules, and all LED connections to all outputs. At the conclusion of
the discovery process, the
Output Selection Menu appears, which includes a
graphic of the rear panel and a representation of the installed modules.
Figure 4-9. Setup Wizard: Output Selection Menu (sample)