Instruction manual

7. Random Access Adjustment Mode

Image 7-7

Blanking

A Top blanking

B Bottom blanking

C Left blanking

D Right blanking

Adjusting the blanking.

1. Push the cursor key ↑ or ↓ to highlight Blanking. (menu 7-45)

2. Press ENTER to display the blanking menu. (menu 7-46)

3. Push the cursor key ↑ or ↓ to highlight the desired blanking.

4. Press ENTER to start up the chosen blanking.

5. Use the cursor keys to adjust the blanking.

GEOMETRY

SHIFT

SIZE

SIDE KEYSTONE

BLANKING

ASPECT RATIO [4:3]

OPTIONS

Select with ↑ or ↓

then <ENTER>

<EXIT> to return

Menu 7-45

BLANKING

TOP

BOTTOM

LEFT

RIGHT

Select with ↑ or ↓

then <ENTER>

<EXIT> to return

Menu 7-46

While the bar scale window is on the screen, press ENTER to change the value indication to an input field.

Enter the desired value with the numeric keys on the RCU. Always 3 digits should be entered. To toggle + to -

or vice versa, use the up or down arrow key.

7.4.7 Aspect Ratio

Purpose

To force the projector in a typical asp

ect ratio. E.g. projecting a 4:3 image in a 16:9 aspect ratio.

R5976562 BARCOSLM G10 PERFORMER 20/10/2004