Mfg. Co. Air Conditioner User Manual

Form No. S3383-1112
Supersedes S3383-510
Page 3 of 8
Optional Field Installed Heater Packages Are Only To Be Used With The Models
As Indicated Below
Optional Field Installed Electric Heater Packages
Optional field-installed electric heater packages are available for 5 through 15Kw
capacities. The heater packages are UL listed to be field-installed into the basic unit.
They feature prewired control circuit wiring with plug-in connector. Simply slide the
heater into the unit, plug in the pretested control circuit and connect the separate high
voltage circuit wiring.
IMPORTANT: While this electrical data is presented as a guide, it is important to
electrically connect properly sized fuses and conductor wires in accordance with the
National Electrical Code and all existing local codes.
retaeH
egakcaP
ledoM
&stloV
esahP
A-24231APA-20331APA-26331APB-26331APA-22431APB-22431APC-22431APA-28431APB-28431APC-28431APA-20631APB-20631APC-20631AP
50A-323PHE1-802/042 XXX
01A-323PHE1-802/042 XXX
51A-323PHE1-802/042XX
90B-323PHE3-802/042X
51B-323PHE3-802/042X
50A-315PHE1-802/042 XXX
01A-315PHE1-802/042 XXX
51A-315PHE1-802/042 XXX
90B-315PHE3-802/042 XXX
51B-315PHE3-802/042 XXX
90C-315PHE3-064 XXX
51C-315PHE3-064 XXX
Optional Field Installed Electric Heater Table — 2 through 5 Ton
retaeH
egakcaP
.oNledoM
tinU
stloV
sesahP
yticapaC&WK.rtH
)084(stloV042@
yticapaC&WK.rtH
stloV802@
V802/042
.rtH
spmA
)084(
retaeH
lanretnI
tiucriC
rekaerB
BtiucriC
WKHUTBWKHUTB
.oN
dleiF
stiucriC
3
.niM
tiucriC
yticapmA
1
revO.xaM
tnerruC
noitcetorP
2
dleiF
rewoP
gniriW
2
dnuorG
eriW
eziS
50A-323PHE1-802/0425
001,7157.3008,211.81/8.02
06/03
132/6252/0301/0101
01A-323PHE1-802/04201001,4305.7000,622.63/6.141
64/3505/068/601
51A-323PHE1-802/04251002,1552.11004,831.45/5.26186/9707/084/48
50A-315PHE1-802/0425
001,7157.3008,211.81/8.02
06/03
132/6252/0301/0101
01A-315PHE1-802/04201001,4305.7000,622.63/6.141
64/3505/068/601
51A-315PHE1-802/04251002,1552.11004,831.45/5.26186/9707/084/48
90B-323PHE3-802/0429007,0357.6000,327.81/7.12
enoN
142/8252/0301/0101
51B-323PHE3-802/04251002,1552.11004,832.13/2.631
93/6404/058/801
90B-315PHE3-802/0429007,0357.6000,327.81/7.12
enoN
142/8252/0301/0101
51B-315PHE3-802/04251002,1552.11004,832.13/2.631
93/6404/058/801
90C-315PHE3-0849 007,038.01
enoN
141514141
51C-315PHE3-08451002,15811
82030121
IMPORTANT: While this electrical data is presented as a guide, it is important to electrically connect properly sized fuses and conductor
wires in accordance with the National Electrical Code and all existing local codes.
1 Maximum size of the time delay fuse or HACR circuit breaker for protection of field wiring devices.
2 Based on wire suitable for 75°C. Other wiring materials must be rated for marked “Minimum Circuit Ampacity” or greater. Based on 75°C copper wire. All wiring
must conform to the National Electric Code and all local codes.
3 These “Minimum Circuit Ampacity” values are to be used for sizing the field power conductors. Refer to the National Electric Code (latest revision), Article 310 for
power conductor sizing.