WH Series Wall Mount Heat Pumps Operator's Manual

Form No. S3210-206
Supersedes S3210-106
Page 12 of 12
BARD MANUFACTURING CO.
BRYAN, OHIO 43506
www.bardhvac.com
Due to our continuous product improvement
policy, all specifications subject to change
without notice.
Before purchasing this appliance, read important
energy cost and efficiency information available
from your retailer.
Form No.
S3210
February, 2006
Supersedes S3210-106
dellatsnIyrotcaF
edoC
rebmuN
dellatsnIdleiF
traP
rebmuN
noitpircseD
erusserPwoL
lortnoC 1
lortnoCtneibmAwoL
yaleRdna 
tiKtratS 
roodtuO
tatsomrehT 
B3-HMC

E7-HMC

O9-HMC

Q41-HMC

R---
 
S---

T---

P51-CMC 

U---
 
Heat Pump Control Modules
1 For 0KW and circuit breakers (230/208 volt) or toggle disconnects (460 volt) applications, insert 0Z in the KW field of the model number.
2 Insert “D” for dehumidification with hot gas reheat. Reference Form F1743 for complete details.
Heat Pump Wall-Mount Model Nomenclature
WH 36 1 - A 10 X X X X X B
MODEL NUMBER l
CAPACITY |
18 - 1½ Ton
24 - 2 Ton
30 - 2½ Ton
36 - 3 Ton
42 - 3½ Ton
48 - 4 Ton
60 - 5 Ton
REVISION l
KW 
VOLTS & PHASE
A - 230/208/60/1
B - 230/208/60/3
C - 460/60/3
SLEDOM 242HW,481HW 163HW,103HW 206HW,384HW,124HW
noitpircseD
dellatsnIyrotcaF
.oNedoC
dellatsnIdleiF
.oNtraP
dellatsnIyrotcaF
.oNedoC
dellatsnIdleiF
.oNtraP
dellatsnIyrotcaF
.oNedoC
dellatsnIdleiF
.oNtraP
dradnatS-repmaDriAhserFcirtemoraBX2-DAFBX 3-DAFBX 5-DAFB
etalPffO-knalBB2-POBB3-POBB 5-POB
repmaD
riAhserFdezirotoMM2-DAFMM 3-DAFMM 5-DAFM
tsuahxE/wnruteRgnirpS-rotalitneVlaicremmoCV2-VRCV 3-SVRCV 5-SVRC
tsuahxE/wnrut
eRrewoP-rotalitneVlaicremmoC------P 3-PVRCP 5-PVRC
gnitaludoMylluF-)lanretnI(rezimonocEEB2-MFIEEC3-MFIEEC5-MFIE
tloV0
32-rotalitneVyrevoceRygrenERB2A-VREWRC3A-VREW 1 RC5A-VREW 1
tloV064-rotalitneVyrevoceRygrenERB2C-VREWRC3C-VREW 1 RC5C
-VREW 1
CONTROL MODULES
(See Chart Below)
COIL OPTIONS
X - Standard
1 - Phenolic Coated Evaporator
2 - Phenolic Coated Condenser
3 - Phenolic Coated Evaporator
and Condenser
COLOR OPTIONS
X - Beige (Standard)
1 - White
2 - Mesa Tan
4 - Buckeye Gray
5 - Desert Brown
8 - Dark Bronze
FILTER OPTIONS
X - 1 inch Throwaway (Standard)
W - 1 inch Washable
P - 2 inch Pleated
| OUTLET OPTIONS
X - Front (Standard)
T - Top (on WH30 and
WH36 Models)
VENTILATION OPTIONS
(See Table Below)
Ventilation Options
1 Intake and exhaust can be independently adjusted.
1 The low pressure control is auto reset. It includes a lock-out feature and is resettable from the wall thermostat. All low pressure controls use a timed bypass circuit
to prevent nuisance tripping during low temperature start-up.
2 The low ambient control includes an 8201-008 (fan relay) and permits cooling operation down to 0°F.
3 For WH242-A, WH301-A, WH361-A and WH421-A models. The CMC-15 can be used with any control module combination.
NOTE: The compressor anti-cycle relay is standard on all heat pump models.
4 The outdoor thermostat is adjustable from 0°F to 50°F. It is suitable for use as a compressor cut-off thermostat.
SPECIALTY PRODUCTS 2 |
(Non-Standard)