Material Safety Data Sheet

WHITELIGHTNING® D Page 2 of 2
SECTION 5: REACTIVITY DATA
Chemical Stability:
Yes
If no, under what conditions:
n/a
Incompatibility With Other Substances:
Yes
If so, which ones:
Corrosive to some metals such as brass, mild steel, aluminum
or ferrous metals.
Reactivity Under What Conditions:
n/a
Hazardous Decomposition Products:
Chlorine fumes are given off at temperatures > 1600
o
C
SECTION 6: HEALTH HAZARDS
Route of Entry:
Inhalation and ingestion
Effect of Acute Exposure to Material:
Very low toxicity value may cause irritation of eyes or skin.
Effect of Chronic Exposure to Material:
Unknown
Exposure Limit:
Unknown
Synergetic Material:
None
Irritancy of Material:
Minor irritant
Sensitivity of Material:
Does not occur
Carcinogenetic, Reproductive Effects:
None
SECTION 7: FIRST AID MEASURES
Eye Contact:
In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes. Cold water may be used. Seek medical
attention immediately.
Skin Contact:
Remove from skin by wiping and washing thoroughly with
water.
Inhalation:
Remove victim to fresh air.
Ingestion:
If discomfort exists, induce vomiting. Seek medical attention
immediately.
SECTION 8: PREVENTATIVE MEASURES
Eye Contact:
Wear safety goggles.
Skin Contact:
Wear rubber gloves, boots and long sleeve shirts.
Inhalation:
For dusty or misty conditions, wear NIOSH approved dust or
mist respirator.
Engineering Controls:
Mechanical ventilation recommended in enclosed areas.
Waste Disposal:
Dispose of material in government approved landfill site in
accordance with local laws.
Handling Procedures and Equipment:
Wash skin and equipment with water.
Storage Requirements:
Store in cool dry area.
Special Shipping Information:
No special shipping procedures.
SECTION 9: PREPARATION INFORMATION
Prepared by:
Innovative Surface Solutions
Telephone:
905-427-0318
Preparation Date:
January, 2013
Superseded Date:
ALL PREVIOUS VERSIONS