PENTA _____________________ Operating Instructions
PENTA Thank you for deciding for a high quality product from our company. Your new BARIGO PENTA is an easy to use precision instrument. We have described the functions in detail on the following pages. Please carefully read through this operating manual and get to know the different functions of the BARIGO PENTA. Save this manual for later reference. We practice environment protection. For this reason, you will receive the detailed operating manual on a CD-ROM.
BARIGO – Makes the Difference Table of Contents Safety instructions .................................................................... Basic functions .......................................................................... 4 7 The individual modes ................................................................ The watch mode ....................................................................... The altimeter mode ..................................................................
PENTA Safety instructions Use The BARIGO PENTA is intended as a chronometer with additional functions for weather forecast, as a compass, altimeter and thermometer. It is not ideal for commercial areas of application. Danger for children: • The batteries can be life-threatening if swallowed. Thus, store your batteries and your BARIGO PENTA so that it cannot be handled by small children. If a battery is swallowed, medical help is immediately required.
BARIGO – Makes the Difference Correct handling of batteries: • Before inserting the battery, make sure that the contacts in the BARIGO PENTA are clean and clean them if needed! • Only use a new battery! • Pay attention to the polarity (+/-) when inserting the battery! • Never try to recharge batteries! There is a risk of explosion! • Store the batteries in a cool, dry place! Direct heat may damage the batteries.
PENTA • If you do not use the BARIGO PENTA for a longer period of time, remove the battery! • Immediately remove a leaking battery form the BARIGO PENTA! Clean the contacts with a dry towel before you insert a new battery! There is the danger of receiving an acid burn through the battery acid! • Also remove an empty battery from the BARIGO PENTA! • Please do not throw away empty batteries in normal waste, but rather dispose of them properly! • Only use the battery type specified in the technical data! 6
BARIGO – Makes the Difference Basic functions Your BARIGO PENTA is equipped with five function buttons (S1-S5) and the following displays (A1-A5): Weather forecast, compass, altimeter, thermometer and alarm.
PENTA Watch mode The individual modes Second The watch mode Weather forecast Press the S1 button to display the current time in the weather, compass, alarm or altimeter mode. Current time S1 You will hear a single signal tone and now you can read the information displayed in the adjacent display.
Watch mode BARIGO – Makes the Difference Pressing the following buttons has the following functions in the watch mode: S1 – press and hold to set the time S2 – to go to the altimeter mode S3 – to go to the compass mode S4 – to go to the alarm mode S5 – to go to the weather forecast Setting the time The following steps are required for setting the time in the watch mode: 1. Press the S1 button for two seconds until you hear a double signal tone.
PENTA Watch mode pressing S2, to move forward in seconds = press S2 repetitively). 3. Press the S1 button (single signal tone) for the next step. 4. Press the S2 button for AM or PM. 5. Press the S1 button (single signal tone) for the next step. 6. Press the S2 button to set the current time. To move quicker, hold S2. 7. Press the S1 button (double signal tone) to complete the setting mode for the time. The BARIGO PENTA automatically leaves the setting mode if no button is pressed for 2 to 3 minutes.
BARIGO – Makes the Difference Programming process in watch mode A1 Move minute hand to 12 o'clock position A2 Display temperature A3 Display AM/PM A4 Display weather forecast A5 Reset indicator to 60 sec.
PENTA Altimeter The altimeter mode Press the S2 button to view the elevation in the time, weather, compass or alarm mode. Elevation below 1,000 m Weather forecast S2 You will hear a single signal tone and now you can read the information displayed in the adjacent display.
Altimeter BARIGO – Makes the Difference Pressing the following buttons has the following functions in the altimeter mode: S1 – to go to the current time mode S2 – press and hold for the altimeter setting mode S3 – to go to the compass mode S4 – to go to the alarm mode S5 – to go to the weather forecast Calibration mode for the altimeter In Altimeter mode, do the following steps: 1. Press and hold S2 for 2 seconds (Dual tone). A1 shows the current time. A2 shows the temperature.
PENTA Altimeter 3. Press S2 (single tone) for next step. 4. Press S1 to adjust A5 hand to correct Altitude Press and hold S1 to fast adjust. A3 hand will auto adjust relative to A5 hand. When A5 hand is moved 1 complete rotation, the A3 hand will have also moved to 1 km. 5. Press S2 (Dual tone) to exit calibration mode. Press S1 to return to normal mode. The BARIGO PENTA automatically leaves the calibration mode if no button is pressed for 2 to 3 minutes.
Altimeter BARIGO – Makes the Difference Programming process in the altimeter mode S1 return to normal mode S2 exit calibration mode 15
PENTA Weather forecast The weather forecast Press the S5 button to view the weather forecast in the time, compass, alarm Weather forecast or altimeter mode. You will hear a single signal tone and now you can read the information displayed in the adjacent display.
Weather forecast BARIGO – Makes the Difference Pressing the following buttons has the following functions in the weather forecast mode: S1 – to go to the current time mode S2 – to go to the setting mode for the altimeter S3 – to go to the compass mode S4 – to go to the alarm mode S5 – hold for the weather forecast (calibration) Calibration mode for the weather forecast The following steps are required for this in the calibration mode: 1.
PENTA Weather forecast 2. Press the S2 button to correct the weather status. 3. Press the S5 button (double signal tone) to exit the weather calibration mode. The BARIGO PENTA automatically leaves the calibration mode if no button is pressed for 2 to 3 minutes. Changes in the weather (24 to 48 hour forecast) are automatically displayed by the PENTA.
Weather forecast BARIGO – Makes the Difference Also take into account that the weather symbol displayed on the PENTA does not necessarily represent current weather conditions, but is a forecast of those expected over the next 24-48 hours. This means that the forecasted weather conditions may deviate from the current ones.
PENTA Weather forecast Programming process for the weather forecast mode A1 Display current time A2 Display temperature A3 Displays AM/PM of the current time A4 Display local weather status A5 Display the seconds Weather forecast mode S5 S5 S2 Press for 2 seconds S2 (double signal tone) (double signal tone) S1 Exit settings mode for weather status S2 Correct weather status S3 + S4 + S5 Without function 20
BARIGO – Makes the Difference Compass The compass mode Press the S3 button to view the compass in the time, weather forecast, Weather forecast alarm or altimeter mode. You will hear a single signal tone and now you can read the information displayed in the adjacent display.
PENTA Compass Pressing the following buttons has the following functions in the compass mode: S1 – to go to the current time mode S2 – to go to the setting mode for the altimeter S3 – hold for the compass mode S4 – to go to the alarm mode S5 – to go to the weather forecast The BARIGO PENTA automatically leaves the compass mode after 30 seconds by changing into the watch mode. Press the S3 button again to return to the compass mode.
Compass BARIGO – Makes the Difference 1. Press the S3 button for two seconds until you hear a double signal tone. The indicator A5 will automatically move to the "zero" position (= N/360°). If the indicator is not at the zero position, continue to the next step. 2. Press S2 to set the indicator A5 to the zero position. To move quicker, hold the S2 button. 3. Place the BARIGO PENTA on a level surface and rotate the BARIGO PENTA 360° twice within 30 seconds. 4.
PENTA Compass Programming process in the compass mode A1 Display current time A2 Display temperature A3 Display AM/PM A4 Display local weather status A5 Moves the indicator to the zero degree position (= N/360) Compass mode S2 Press for 2 seconds S2 (double signal tone) S3 (double signal tone) S3 S2 Setting of the indicator A5 to the zero position, rotate the watch twice on a flat surface S3 Exit calibration mode S1 + S4 + S5 Without function 24
BARIGO – Makes the Difference Alarm The alarm mode Press the S4 button to view the alarm time in the time, weather forecast, Weather forecast compass or altimeter mode.
PENTA Alarm Pressing the following buttons has the following functions in the alarm mode: S1 – to go to the current time mode S2 – to go to the altimeter mode S3 – to go to the compass mode S4 – to turn the alarm ON/OFF S5 – to go to the weather forecast The BARIGO PENTA automatically leaves the alarm mode after 30 seconds by changing the display to the current time. After resetting the BARIGO PENTA, the alarm is preset to OFF. The maximum length of the alarm signal tone is 20 seconds.
BARIGO – Makes the Difference Alarm Turn alarm ON/OFF You can turn the alarm ON or OFF by pressing the S4 button in the alarm mode. The following image shows the setting of the indicator from the scale A4 for an alarm that is turned ON and OFF. After successfully setting the alarm (ON or OFF), press S1 to exit. To set the alarm, follow the settings on Page 27.
PENTA Alarm Setting mode for the alarm The following steps are required for this in the alarm mode: 1. Press the S4 button for two seconds until you hear a double signal tone. The indicator from the scale A3 will move towards AM or PM. (AM = ante meridiem "morning" 0:00 - 12:00, PM = post meridiem "afternoon“ 12:00-24:00) 2. In order to select AM or PM, press the S2 button. 3. Press the S4 button (single signal tone). The indicator of the scale A1 will move to the currently set alarm time. 4.
BARIGO – Makes the Difference Alarm Programming process for setting the alarm mode A1 Move minute hand to the 12 o'clock position A2 Display temperature A3 Move to AM or PM A4 Display weather status A5 Displays seconds Alarm mode S2 Press for 2 seconds S2 (double signal tone) S4 S4 S2 Select AM/PM S2 Next step S1 + S3 + S5 Without function (single signal tone) A1 Show alarm time A2 Display temperature A3 Show AM or PM A4 Display weather status A5 Displays seconds S2 (double signal tone) S4 S2 Settin
PENTA Reset The reset mode The following steps should be executed to return the BARIGO PENTA to factory settings: The settings in the reset mode occur according to the following sequence: A5 A4 A1 A2 A3 1. You can reset the BARIGO PENTA by simultaneously pressing the S1, S2, S3, S4 and S5 buttons. Here it does not matter which mode the BARIGO PENTA is currently in. You will hear a long signal tone and all indicators will stop. 2.
Reset BARIGO – Makes the Difference 3. Press the S5 button (single signal tone) in order to set the indicator of the A4 scale. 4. Press the S1 or S3 button in order to set the indicator of the scale A4 to the “overcast” position. 5. Press the S5 button (single signal tone) in order to set the indicator of the A1 scale. 6. Press the S1 or S3 button in order to set the indicator of the A1 scale to the “12 o’clock” position. Press the S1 button to set the indicator clockwise.
PENTA Reset clockwise. Hold the S3 button to move quicker in a counterclockwise direction. 7. Press the S5 button (single signal tone) in order to set the indicator of the A2 scale. 8. Press the S1 or S3 button in order to set the indicator of the A2 scale to 0°C.
Reset BARIGO – Makes the Difference 9. Press the S5 button (single signal tone) in order to set the indicator of the A3 scale. 10. Press the S1 or S3 button in order to set the indicator of the A3 scale to the “0” position. 11. Press the S4 button (long signal tone) in order to leave this setting mode and to change to the display mode of the current time. Changing the battery will always cause a reset.
PENTA Care and maintenance Water resistance: The BARIGO PENTA is waterproof up to a pressure of 5 bar. For example Washing Rain Bathing Showering Swimming Snorkeling Diving The BARIGO PENTA is waterproof up to 5 bar for the activities listed in the table.
BARIGO – Makes the Difference Battery change: If the BARIGO PENTA stops working or the display becomes inaccurate, we recommend having the battery changed by an authorized service workshop or a retail specialist (battery type: CR 2032). - To change the batteries, first unscrew the cover on the rear using a coin and carefully remove the white, protective foil.
PENTA Please note: If one or more of the hands of your BARIGO PENTA make uncontrolled movements, this indicates that battery power is low - this is not a defect. In this case a change of battery is necessary! Care tips and general information: • Never open the casing yourself. • The BARIGO PENTA is protected from impacts that may occur when it is worn as designated. • Do not expose the BARIGO PENTA to any extreme temperature changes in order to avoid the formation of condensation.
BARIGO – Makes the Difference Guarantee We offer a two year guarantee from the purchase date. We provide a guarantee of one year from the purchase date for a BARIGO PENTA purchased abroad. The BARIGO PENTA was manufactured according to the newest manufacturing methods and was subject to precise quality control. We guarantee the proper condition of this article. We will repair all material or manufacturing errors within the guarantee period free of charge.
PENTA Button functions The following table provides an overview of the individual button functions in the respective modes from the BARIGO PENTA.
Button functions Mode Button BARIGO – Makes the Difference S1 (time) S2 (elevation) S3 (compass) Elevation calibration Setting in a clockwise direction, button sound To exit after completion Button sound Button sound Button sound Compass mode Current time mode, button sound Altimeter mode, button sound Hold to calibrate, button sound Alarm mode, button sound Weather forecast mode, button sound Compass calibration Button sound Set indicator A5 to “zero degrees” Button sound Next setting
PENTA Mode Button functions Button Set Alarm Weather forecast mode Weather calibration 40 S1 (time) S2 (elevation) S3 (compass) Button sound Setting in a clockwise direction, button sound Button sound Current time mode, button sound Altimeter mode, button sound Compass mode, button sound Button sound Setting in a clockwise direction, button sound Button sound S4 (alarm) Next setting step and leave after completion, Button sound Alarm mode, button sound Button sound S5 (weather) But
BARIGO – Makes the Difference Dear Customer, BARIGO is constantly working on the further development of all types and models. Please understand that changes to the scope of delivery in the form, equipment and technology are possible at all times. Thus, no claims can be derived from the information, images and descriptions in this operating manual. The reprinting, reproduction or translation of any part of this document is prohibited without written consent from BARIGO.
PENTA Technical data Waterproof: Ambient temperature: Battery: up to 5 bar -15°C to 45°C CR2032 Lithium 3V Altimeter: Thermometer: Compass: 0 m to +9,000 m -15°C to 45°C Resolution 0° to 360° Dimensions: Casing: Ø 45 mm Clock face: Ø 40 mm Height of the casing: 16 mm Net weight: 125 g Accessories Rubber wrist strap (article no. 11-55), available where you purchased your PENTA.
BARIGO – Makes the Difference Recycling and Disposal Batteries do not belong to normal waste. As a consumer, you are obligated to return old batteries for environment-friendly disposal. You can drop off old batteries at public collecting stations in your community or everywhere where such batteries are sold. This device and its packaging were created from materials that can be disposed of in an environmentally-friendly manner and can be returned for proper recycling.
PENTA Disposal of electrical and electronic devices (applicable in the European Union and other European States with systems for the separate collection of materials) This symbol on the product or on its packaging indicates that the product may not be disposed of together with normal waste. Instead, it must be dropped off at a collecting station designated for the recycling of electrical and electronic devices.
BARIGO Barometerfabrik GmbH Eichendorffstr. 28 78054 Villingen-Schwenningen Germany Internet: http://www.barigo.de eMail: info@barigo.de © 2011 BARIGO00055HN11V8.4.
