Instructions / Assembly

User’s Manual Page 10
Locking Safety Screw & padlock Installation
being accidently dislodged from the VW401P.
1) Locate the pre-installed security locking safety
screw at the bottom of each of the mounting
brackets.
2) Use the Allen key (supplied) to tighten the locking
safety screw.
3) The VW401P provide padlock installation on each
bracket for anti-theft feature.
Do not overtighten the locking safety screws.
(not included)
Option Padlock
feature 1 pcs per bracket
VW401P
Attaching the Flat-Panel to the Mount
Mounting the Flat-Panel
Mounting bracket adjustments are factory pre-set
(see Note).
This section requires two people.
that top and bottom hooks of both mounting
brackets are securely seated on the upper and
lower mounting rails of the wall panel.
1)
mounting rails on the wall panel.
2)
the wall.
3) Engage the top and bottom mounting brackets to
the rails of the mount.
Note: These registers
must align prior to
installation.They are
factory set. Check
to determine proper
alignment