Manualshelf

User Manual

ManualsBrandsBarlus ManualsCar & Vehicle ElectronicsAquarium CCTV Marine IP 316L Stainless Steel 4MP 2.8mm Lens IP68 Camera Solutions Inspection System
12345678910
7
The brief instructions only cover a few of the main setting options for the camera
functions.
Setting date time
To set the correct time / date, follow the menu structure: Config> System> System-
Time. The simplest transfer of the time / date setting is by setting the point next to
the setting "Synchronize with local computer" and pressing the "Save" button. The
settings from the computer are sent to the camera. The camera will restart to apply
the time / date change.
Time / date setting by an NTP server
Internet access via the router must be available for this. Menu structure: Config>
System> System-Time
Put the point next to the setting "NTP Server"
Make the setting for the correct time zone (GMT + 1). A valid NTP server must be
set for time synchronization so that the correct time is always displayed. German
NTP servers on the Internet are e.g. ntp0.freenet.de / ntp1.freenet.de / ntp1.t-
online.de / ntp.web.de.
If the selected NTP server uses a different port than the standard port 123, adjust
this accordingly. The frequency of the synchronization can be set using the interval
time setting. The camera will restart to apply the time / date change.
Display of camera name and time / date
Follow the menu structure: Config> Video Settings> OSD Settings to display the
camera name and the time / date.
1. By setting / removing the tick, the display of the camera name is activated /
deactivated. Enter the desired camera name in the line. The position of the overlay
in the picture can be changed using the four arrow keys. Up to three texts can be
entered. Line two (Title2) is defined for the display of the selected light control
operating mode.
2. Selection of the basic color black / white for the text overlays.
3. The date / time and day of the week can be activated / deactivated by setting /
removing the corresponding check mark. The position of the overlay in the picture
can be changed using the four arrow keys
4. Select the format you want for the date display from the list.
5. The font size of the overlay can be adjusted independently for each of the three
video streams in three selectable sizes.
Save the changes made with the "Save" button.