User Guide

Loading your Crossbow

1.) Place the arrow forward under the front sight bracket

and lay the arrow on the flight surface. When using

arrows with moon nocks, be sure that the odd colored

fletch is placed in the flight grove and that the concaved

nock is parallel to the string.

2.) Slide the arrow back under the arrow retaining spring

and fully into the trigger mechanism. Note: The

arrow retaining spring should only exert enough

pressure to hold the arrow in place without lifting it from

its position on the flight surface.

Firing your Crossbow

To fire the arrow from your crossbow:

1.) Point the crossbow in a safe direction.

2.) Slide the safety forward to the off position. The

crossbow will now fire when the trigger is pulled. The safety

MUST be disengaged in this manner prior to every shot. BE

SURE TO KEEP YOUR FINGERS BELOW THE STOCK

FORE END (FLIGHT TRACK) WHILE SHOOTING.

This will prevent your hands from being struck by the

string as it travels forward. The velocity of the string

hitting your fingers will cause severe injury.

INCORRECT

CORRECT CORRECT