User Guide

6
ASSEMBLY GUIDE
Attaching Prod Housing to Stock
1. Place the string on top of the flight track while sliding
cables in the long U-shaped channel. See Figure 1
2. Push bow limb assembly gently until it engages with
stock.
3. Secure the bow limb assembly with the 5/16-18 X 2-1/4”
socket cap head bolt and lock washer. Tighten with ¼”
hex key. See Figure 2
Attaching the Foot Stirrup Assembly
1. Align the first hole on the foot stirrup over the first hole
on the prod housing. Insert the ¼-20 Button Head Cap
Screw through the foot stirrup and prod housing. Attach
lock washer and acorn nut.
2. Insert the second ¼-20 Button Head Cap Screw through
the third hole of the foot stirrup and through one of two
½” diameter nylon washer, then through the second hole
of the prod housing, through the second ½” nylon
washer. Attach lock washer and acorn nut. Tighten with
5/32” hex key. See Figure 3
23.
22.
21.
22.23.
F
i
g
. 1
Fig. 2 Fig. 1
Fig. 3