GREEN MOWER LAWN MOWER Owner's Handling Manual LM56GA SN 14723 and onwards LM66TA SN 10045 and onwards Read this manual before using the machine.
1 CONTENTS CONTENTS…………………………………………………………………………………… 1 Warning for Safety …………………………………………………………………………… 2 Greeting ……………………………………………………………………………………… 2 Safety precautions …………………………………………………………………………… 3 Part names …………………………………………………………………………………… 5 Features of LM56GA/LM66GA/LM66TA ………………………………………………… 6 Specifications ………………………………………………………………………………… 6 Handling ……………………………………………………………………………………… 6 1.
Warning for Safety Greeting Thank you very much for purchasing BARONESS GREEN MOWER. This Owner's Handling Manual explains the method of correct handling, adjustment, and maintenance of the mower. Thoroughly read the manual before operation. Carefully read the engine operation manual before starting the engine. Mowers undergo thoroughgoing trial operation and inspection before shipment.
3 Safety precautions 3) Do not operate the machine in such cases. WARNING The lawn mower has a rotating blade reel cylinder (sharp blade), and the safety of operation is subject to the place of use, obstacles, lawn conditions, and many other factors. As a maker, we specifically request the user to thoroughly inspect and maintain the machine, make efforts to become skilful in operating the machine, and correctly and safely use the machine in order to avoid injury on yourself and others.
7) Precautions to take during operation DANGER ● ● ● CAUTION ● ● DANGER ● ● ● ● DANGER ● 8) Precautions as to inspection Check that there is no person or any object that may be broken around the machine during operation. Check that there is no player in the vicinity, otherwise a flying golf ball may hit against you. Exercise adequate care so that you will not get injured by flying objects or the blade. Exercise special care when working on a slope or undulating ground.
5 Part names Throttle lever Handle Main clutch lever Engine switch Brake lever Engine switch cord Engine Engine clutch cover Blade reel Drum wheel Travelling wheel Wheel Shaft Groomer clutch lever Front groomer Front roller Grass catcher
Front groomer Features of LM56GA・66GA・66TA Dethatching reel Dethatching brush of of Working width Number Working width Number Working width blades blades ● The lightest green mower of all models of this class ● The weight balance and undulation following performance have been improved for better green mowing. ● The newly-designed handle improves the operability, lessening the operator's fatigue. ● The structure of the clutch has been changed for smooth starting.
7 1-2 1-3 Installing the stand 1) Temporarily secure the left side of the stand to the frame with the bolt, washer (inside), and nut (outside). 2) Put the spring on the projection of the frame and the projection at the right edge of the stand. 3) While pulling the right side of the stand backward, make alignment with the hole in the frame, and secure the stand with the bolt, washer (inside), and nut (outside).
4.Engine starting sequence 2.Inspection before use 2-1 10h 2-2 4-1 Greasing The transmission and intermediate transmission gears are equipped with needle bearings. Grease them every 10 hours. Shortage of grease will cause damage to the needle bearings. Before starting engine Carefully read the gasoline engine operation manual before starting the engine. The handle cover is equipped with an engine switch. Check the "ON/OFF" positions.
9 4-3 CAUTION Stopping the engine 5.Machine operation ※Remember the method for stopping the engine in an emergency. 5-1 1) Do not grip the main clutch lever. Main Clutch lever DANGER Before operation ● Check that each portion - especially the brake and clutch - operates satisfactorily before starting machine operation. ● Make sure that the machine can be stopped immediately at any time. ● Exercise care so that you and people around the machine will not be injured.
5-4 5-7 Groomer clutch lever The lever is at the top of the groomer gear case on the outside of the right frame. There are three changeover positions - "Normal rotation" (in the same direction as the rotating direction of the blade reel cylinder), "Rotation stop," and "Reverse rotation" (in the direction opposite to the direction of rotation of the blade reel cylinder). Change the positions according to the type of work.
11 5-9 5-12 ［IMPORTANT］ Greasing fasten Clutch cover The clutch cover is on the left side of the engine, covering the engine clutch. It is secured by turning the fastenbolt clockwise (by 4-5 turns). fastenbolt open Periodically fill up respective grease nipples. Exercise special care when greasing the sections where needle bearings are used. (Intermediate shaft of the right and left gears and the intermediate shaft of the groomer) Periodically fill up the grease nipples with approx.
5-13 Setting the mowing height gauge and blade thickness 4)［IMPORTANT］ Adjustment of front roller height Bring the mowing height gauge into contact with the front roller and drum (as shown below), and adjust the height of the bottom blade. a. Loosen the tall nut of the roller bracket, and move the front roller up or down with roller adjuster. b. Position the front roller with the mowing height gauge. c. Make adjustment at both edges. d. Tighten the tall nut, and secure the roller bracket.
13 6. Blade engagement Check that the engine is at rest before making adjustment. Grind and adjust the blade reel cylinder and bottom blade entirely so that a newspaper will be cut sharply. 6-1 ［IMPORTANT］ Lapping Conduct lapping after mowing operation (before adjusting the engagement). 1) Check the entire portion of the blade reel cylinder to check which portion is dull. (If a newspaper cannot be cut in any portion, put in two sheets of paper to carefully check which portion is dull.
Center of cutter pin 1) Replace the bearings and reel shaft seals on both sides of the blade reel cylinder. Use the bearing 30204JRP6 that has the smallest error. 0.3 Cam adjustment 2) Sufficiently apply grease (EXCELITE EPNO2) to the bearing and seal. (Apply grease to the bearing while turning the roller.) The bottom blade rises 3) Method to fasten nut after installing the blade reel cylinder ［IMPORTANT］Tighten the nut until the length of the spring reaches 11.5 mm, and lock the nut.
15 6-7 Attaching/detaching the bottom blade base Remove the bottom blade base arm, and then remove the bottom blade base. Attach the bottom blade base, and then attach the bottom blade base arm. Bottom blade base arm Bottom blade base arm 6-9 Specification for maintenance Qty of engine oil 0.6dm3（0.6L） Plug NGK BR4HS Capacity of gasoline tank 2.5dm3（2.5L） Tire air pressure 120kpa（1.2kg/cm2） Engine speed 1400∼3400rpm Loosen. Tighten. Loosen. Tighten. Loosen. Bottom blade base 6-8 Tighten.
8. CAUTION 9) When the machine is to be stored for a long time exceeding 5 months, remove gasoline from the engine. Precautions for engine operation For the engine, refer to the engine operation manual. 1) Use gasoline for automobiles as the fuel of the engine.
17 Location of Labels for LM56GA and LM66TA Code No.
Understanding the machine safety labels ①Use only unleaded gasoline. ① ⑤ ⑤Stop the engine and wait for moving parts to stop. ② ②Read the owner's manual. ③ K4205001600 ③keep a safe distance from the machine. ⑥ ⑥It is strongly advised that the operators of this machine wear ear defenders for their protection. ④ ④Do not open or remove safety shields while engine is running. K4205001330 ⑦ ⑧ ⑦Stay clear of the hot surface. ② ⑧Exhaust gas is poisonous. Do not operate in an unventilated area.
Head Office 1-26, Miyuki-cho, Toyokawa, Aichi-Pref. 442-8530 Japan.
