Network Hardware User Manual

165 Barracuda NG Network Access Client - Administrator’s Guide
11.3.14 Log Settings
For proper analysis verbose output is essential, thus it is possible to enable logging for both the Health
Agent service and the Barracuda NG Access Monitor service to receive detailed information, see
11.4 Log Files, page 165 for more information.
11.3.15 Barracuda NG Health Agent Logging
To edit this option manually, modify the following registry key:
11.3.16 Barracuda NG Network Access Client Logging
To edit this option manually, modify the following registry key:
11.4 Log Files
Information for analysis, serialized by the NG Network Access Client, is stored on the local hard drive
if verbosity is enabled. These files can be found in the
log directory located in the Barracuda NG
Network Access Client installation directory. These files can be opened either using the Barracuda NG
Access Monitor, by double clicking the desired log file in the "Advanced Settings" section or with the
desired text editor.
Following log files are available, depending on the level of verbosity configured:
Table 11–14 Registry entry to log clients
Item Description
Path
HKEY_USERS\.Default\Software\phion\phionvpn\settings
Key Logging
Value (Default=1)
0 - disabled
1 - enabled
Table 11–15 Registry entry to log Barracuda NG Access Monitor
Item Description
Path
HKEY_USERS\.Default\Software\phion\phionha\settings
Key Logging
Value (Default=1)
0 - disabled
1 - enabled
Table 11–16 Log Files
File Description
phions.log Log information by the Client Service, depending on option (see 11.3.15, Page 165)
phionha.log Log information by the Barracuda NG Access Monitor, depending on option (see 11.3.16 Barracuda NG Network Access
Client Logging, page 165)
wpa_supplicant_{UUID}.lo
g
Log information by the wpa_supplicant for each network interface, depending on option (11.3.15 Barracuda NG Health
Agent Logging, page 165)