User Guide

Safety Guidelines
For: Wildcat III
The Wildcat III is equipped with an automatic safety, which
engages every time the crossbow is cocked. The safety must be
released before each shot. This, as with any other mechanical
device does not guarantee total safety, as no safety device is a
substitute for common sense and safe handling. NEVER pull the
trigger on a crossbow when the safety is in the “safe” position
or anywhere between “safe” and “fire”. Do not attempt to alter
or modify the trigger mechanism, doing so will void your
warranty and may cause personal injury to yourself or others.
The following rules should be followed at all times:
EXTREME CAUTION SHOULD BE USED AT ALL TIMES
WHEN HANDLING A CROSSBOW. FAILURE TO FOLLOW
THESE RULES COULD RESULT IN SERIOUS INJURY OR
DEATH.
Always keep your fingers below the flight track
and out of the path of the strings when firing the
crossbow.
Never dry-fire the crossbow (shoot without an
arrow). Dry firing will void the warranty and
result in damage to the limb, cable and string
possibly causing personal injury.
Never fire the crossbow until you are sure of your
target.
Always use an adequate target and backstop when
target shooting.
Always use suitable crossbow arrows, such as
Barnett's 16" 2216 crossbow arrows for the RC-
150. Arrows of improper stiffness or mass weight
may damage the limb and cable assembly, voiding
the warranty and possibly cause personal injury.
Always inspect the crossbow and arrows before
firing. Bent or damaged arrows are not safe to fire
and should be discarded or repaired.
7