User's Manual Part 1

75 of 285
Scanning With the Tunable Receiver
The receiver can scan any range of frequencies from 500 kHz to 30 MHz with a
frequency step down to 10 Hz.
Setting up Scan Frequencies
To set up the frequency scan parameters, enter the tuning receiver mode, then:-
Press the key for two seconds until the following is
displayed:-
Enter a new frequency, using the numeric keys, to set the lower
scan limit boundary - example below shows the lower limit set to
12 MHz:-
then press the key
Enter a new frequency, using the numeric keys, to set the upper
scan limit boundary - example below shows the upper limit set to
14 MHz:-
then press the
key