User's Manual Part 1

79 of 285
This screen shows the default Selcall self ids for OEM and International type
selcalls. INT1 is the default 4 digit ID for International or CCIR programmed
channels. INT2 is the default 6 digit ID for International or CCIR programmed
channels. OEM1 is the default 4 digit ID for OEM programmed channels. OEM2
is the default 6 digit ID for OEM programmed channels. If “N/A” is shown then
that particular ID has not been set as yet. In the screen below neither OEM
Selcall self id has been set.
Shows receive and transmit battery levels, also shows PA temperature.
Shows estimated charge capacity of the battery and estimated time till discharge.
If the GPS option is enabled and a GPS is fitted this screen will show the current
GPS coordinates.