Instructions / Assembly

Pickets

Post Top Installation:

Use a rubber mallet to gently drive the post tops

onto the posts (sold separately). Be careful not to

damage the post top (Fig. 3).

Fig. 3

Layout Installation:

• Establish your fence line by staking out the

areas you wish to enclose. Locate each point in

which you will need an end, corner or gate post

and mark it with a stake (Fig. 1).

• For 6' sections using 2" posts: measure 72

⁄4

from

the center of an end point and mark with

stake (Fig. 2).

NOTE:

• Installing on sloped terrain will reduce distance

between posts.

• If you are left with a space less than a full panel,

the panel can be cut down to t the space by

using a hacksaw. “Notch” the cut ends of the

horizontal rails so they will sit inside of post.

• Attach string to each stake to provide straight

guide lines.

• Plan gate placement, opening and hardware

clearance before installing fencing.

Fig. 1

Fig. 2

For 6' sections using 2" posts

⁄4"