Instructions / Assembly

5
Panel/Post Installation:
As the post is setting up, install the rst fence
panel. Insert the horizontal rails from the panel into
the punched holes from the previously installed
post. Place the rails as far into the post as they will
go (Fig. 1).
Fig. 1
Fig. 2
Place the next required post into the dug hole, and
slide the post onto the rails of the panel as far as
possible.
Plumb and level the post and add concrete
according to manufacturer's instructions.
After setting rst fence section, proceed
systematically with post, panel, post, etc. (Fig 3).
Fig. 3
Top view of post
Rail Rail
Post
Fig. 4
After concrete has set, fasten the fence section to
the posts using #8 x 1" self-tapping screws (Fig. 4).
IMPORTANT:
Be careful not to over-tighten screws.
1.
2.
3.
4.