Programming Manual

i480e&i480e-MD2 Programming Manual
98 / 139
profile
Profile type, where
0: Not HSP/HFP;
1: Headset Profile;
2: Hands-free Profile.
Note
bd is comprised of 12 bytes hexadecimal characters.
20.3 AGDISC
The AGDISC command is used to disconnect the service level connection with
the remote device.
Command
AT+B AGDISC
Response
AT-B AGDISC [status],[bd]
Parameters
status
Values in the chapter 20.1.3.
bd
Remote Bluetooth device address
Note
N/A
20.4 AGAUDIOCONN
The AGAUDIOCONN command is used to create a SCO/eSCO connection with
the remote device.
Command
AT+B AGAUDIOCONN
Response
AT-B AGAUDIOCONN [status]
Parameters
status
Values in the chapter 20.1.4.
Note
N/A
20.5 AGAUDIODISC
The AGAUDIODISC command is used to disconnect the SCO/eSCO connection
with the remote device.
Command
AT+B AGAUDIODISC
Barrot Confidential