Programming Manual

i480e&i480e-MD2 Programming Manual
99 / 139
Response
AT-B AGAUDIODISC [status]
Parameters
status
Values in the chapter 20.1.5.
Note
N/A
20.6 AGAUDIOTRANS
The AGAUDIOTRANS command is used to transfer audio from/to remote
device.
Command
AT+B AGAUDIOTRANS
Response
If audio is transferred to HF, response is:
AT-B AGAUDIOCONN [status]
If audio is transferred to AG, response is:
AT-B AGAUDIODISC [status]
Parameters
status
Values in the chapter 20.1.1.
Note
N/A
20.7 AGCIEVSVC
The AGCIEVSVC command is used to send a service indicator to the HF, only for
HFP.
Command
AT+B AGCIEVSVC [service]
Response
AT-B AGCIEVSVC [status]
Parameters
service
0: no service;
1: presence of service.
status
Values in the chapter 20.1.1
Note
N/A
20.8 AGCIEVSIG
The AGCIEVSIG command is used to send a signal strength indicator to the HF,
Barrot Confidential