Programming Manual

i480e&i480e-MD2 Programming Manual
103 / 139
10: SIM not inserted;
11: SIM pin required;
12: SIM PUK required;
13: SIM failure;
14: SIM busy;
16: incorrect password = 16;
17: SIM PIN2 required;
18: SIM PUK2 required;
20: memory full;
21: invalid index;
23: memory failure;
24: text string too long;
25: invalid chars in text string;
26: dial string too long;
27: invalid chars in dial string;
30: no network service;
32: network not allowed.
status
Values in the chapter 20.1.1.
Note
This command can only be sent after HF enables the “Extended
Audio Gateway Error Result Code” feature in the AG and returns the
AGCMEEIND indication.
20.16 AGCLIP
The AGCLIP command is used to send caller ID to HF, only for HFP.
Command
AT+B AGCLIP [type],[number]
Response
AT-B AGCLIP [status]
Parameters
type
Values 128-143: The phone number format may be a
national or international format, and may contain
prefix and/or escape digits. No changes on the
number presentation are required.
Values 144-159: The phone number format is an
international number, including the country code
prefix. If the plus sign ("+") is not included as part of
the number and shall be added by the AG as needed.
Values 160-175: National number. No prefix nor
escape digits included.
Barrot Confidential