Programming Manual

i480e&i480e-MD2 Programming Manual
110 / 139
21.1 AGCONN
The AGCONN indication happens when remote device creates the service level
connection with the module.
Indication
AT-B AGCONN [status],[bd], [profile]
Parameters
status
Values in the chapter 20.1.2.
bd
Remote Bluetooth device address
profile
Profile type, where
0: Not HSP/HFP;
1: Headset Profile;
2: Hands-free Profile.
Note
N/A
21.2 AGDISC
The AGDISC indication happens when the remote device disconnect the service
level connection with the module.
Indication
AT-B AGDISC [status],[bd]
Parameters
status
Values in the chapter 20.1.3
bd
Remote Bluetooth device address
Note
N/A
21.3 AGDIALIND
The AGDIALIND indication is used to tell the host the HF has dialed a number,
only for HFP.
Indication
AT-B AGDIALIND [type],[number]
Parameters
type
0: normal dial;
1: memory dial;
2: last number redial.
Barrot Confidential