Programming Manual

i480e&i480e-MD2 Programming Manual
121 / 139
Addressed Player Changed.*/
avrcp_status_guard_reserverd = 0xFF /* Dummy Place Holder */
24.2 AVRCPCONN
The AVRCPCONN command is used to establish a AVRCP connection with the
remote device.
Command
AT+B AVRCPCONN [bd]
Response
AT-B AVRCPCONN [status],[bd]
Parameters
bd
Remote Bluetooth device address.
status
Values in the chapter 24.1.
Note
bd is comprised of 12 bytes hexadecimal characters.
24.3 AVRCPDISC
The AVRCPDISC command is used to release the AVRCP connection with the
remote device.
Command
AT+B AVRCPDISC
Response
AT-B AVRCPDISC [status],[bd]
Parameters
bd
Remote Bluetooth device address.
status
Values in the chapter 24.1.
Note
bd is comprised of 12 bytes hexadecimal characters.
24.4 A2DPCODEC
The A2DPCODEC indication is used to inform the host codec negotiated with
the remote device.
Indication
AT-B A2DPCODEC [codec_id]
Parameters
codec_id
1, SBC
2, MP3
3, AAC
Barrot Confidential