Programming Manual

i480e&i480e-MD2 Programming Manual
122 / 139
25 AVRCP Target Indication Definition
This chapter introduces the AVRCP (Target Role) relevant indications’ definition.
Indication that are defined in this chapter is used for category 1 device.
25.1 AVRCPSTAT
The AVRCPSTAT indication is used to inform the host unit when the AVRCP
Controller’s is changed.
Indication
AT-B AVRCPSTAT [state]
Parameters
status
AVRCP connection status, where,
1: avrcpReady;
2: avrcpConnecting;
3: avrcpConnected.
Note
N/A
25.2 AVRCPCONN
The AVRCPCONN indication happens when local or remote device creates the
A2DP connection.
Indication
AT-B AVRCPCONN [status],[bd]
Parameters
status
Values in the chapter 24.1.
bd
Remote Bluetooth device address.
Note
AVRCP connection will be established after A2DP connection has
been created
5, APTX
6, APTX_LL
Note
N/A
Barrot Confidential