Programming Manual

i480e&i480e-MD2 Programming Manual
42 / 139
0: Call is currently active;
1: Call is currently held;
2: Call is being dialed - mobile originated only;
3: Call is alerting - mobile originated only;
4: Call is incoming - mobile terminated only;
5: Call is waiting - mobile terminated only.
mode
Call mode, where
0: voice call;
1: data call;
2: fax call.
multiparty
Call multiparty indicator, where
0: Call is not multiparty;
1: Call is multiparty.
number_type
Number type, where
0: Type of number is unknown;
1: Number is an international number;
2: Number is a national number;
3: Number is a network specific number;
4: Number is a dedicated access, short code.
number
Phone number
status
Values in the chapter 6.1.1.
Note
N/A
6.11 HFSVGS
The HFSVGS command is used to send speaker volume to AG side, for BT
module part, the speaker gain is also changed.
Command
AT+B HFSVGS [vol]
Response
AT-B HFSVGS [status],[vol]
Barrot Confidential