Programming Manual

i480e&i480e-MD2 Programming Manual
48 / 139
5: HfpTLOutgoingCallEstablish;
6: HfpTLActiveCall;
7: HfpTLTWCalling: there is a current call. A new
incoming call arrives, and this new incoming call is in
waiting status.
8: HfpTWCallOnHold: one call is active and another call
is in held status.
9: HfpTWMulticall: multiple calling
10: HfpCallOnHoldNoActive: all calls are in held status.
Note
N/A
7.2HFCONN
The HFCONN indication is used to inform the host unit when it initializes a HFP
connection with the local device.
Indication
AT-B HFCONN [status],[bd], [profile]
Parameters
status
Values in the chapter 6.1.2.
bd
Remote Bluetooth device address
profile
Profile type, where
0: Not HSP/HFP;
1: Headset Profile;
2: Hands-free Profile.
Note
N/A
7.3HFDISC
The HFDISC indication happens when the remote device disconnect the HFP
connection.
Indication
AT-B HFDISC [status],[bd]
Parameters
status
Values in the chapter 6.1.3
Barrot Confidential