Programming Manual

i480e&i480e-MD2 Programming Manual
50 / 139
7.7HFCLIP
The HFCLIP indication is used to inform the host unit of the incoming call’s caller
ID.
Indication
AT-B HFCLIP [callerid]
Parameters
callerid
Incoming call’s caller ID. There is no limit to number
length on HF device side, and it depends on mobile
phone side, but we had better limit it to less than 40
bytes.
Note
N/A
7.8HFCCWA
The HFCCWA indication is used to inform the host unit when the second
incoming call’s caller ID.
Indication
AT-B HFCCWA [callerid]
Parameters
callerid
Incoming call’s caller ID. There is no limit to number
length on HF device side, and it depends on mobile
phone side, but we had better limit it to less than 40
bytes.
Note
N/A
7.9HFNUML
The HFNUML indication is used to inform the host unit of the subscriber
number of the AG side when the SLC connection is established.
Indication
AT-B HFNUML [number]
Parameters
number
The subscriber number of the AG side. There is no limit
to number length on HF device side, and it depends on
mobile phone side, but we had better limit it to less
than 40 bytes.
Note
N/A
Barrot Confidential