Programming Manual

i480e&i480e-MD2 Programming Manual
56 / 139
Parameters
state
A2DP connection status, where
1: a2dpReady;
2: a2dpConnecting;
3: a2dpConnected;
4: a2dpStreaming.
Note
N/A
9.2A2DPCONN
The A2DPCONN indication is used to inform the host unit when it initializes a
AVRCP connection with the local device.
Indication
AT-B A2DPCONN [status], [bd]
Parameters
status
Values in the chapter 8.1.
bd
Remote Bluetooth device address.
Note
bd is comprised of 12 bytes hexadecimal characters.
9.3A2DPAUDIO
The A2DPAUDIO indication is used to inform the host unit that the A2DP audio
connection is on or off.
Indication
AT-B A2DPAUDIO [op]
Parameters
op
0: the A2DP audio connection is off;
1: the A2DP audio connection is on.
Note
N/A
9.4A2DPCODEC
The A2DPCODEC indication is used to inform the host codec negotiated with the
remote device.
Barrot Confidential