Programming Manual

62 / 139
i480e&i480e-MD2 Programming Manual
10.10 AVRCPFF
The AVRCPFF command is used by the CT (Category 2) to fast forward.
Command
AT+B AVRCPFF [op]
Response
AT-B AVRCPFF [status]
Parameters
op
1: start;
0: stop.
status
Values in the chapter 10.1
Note
This command is only used for Category 2 device.
10.11 AVRCPFB
The AVRCPFB command is used by the CT (Category 2) to fast backward.
Command
AT+B AVRCPFB [op]
Response
AT-B AVRCPFB [status]
Parameters
op
1: start;
0: stop.
status
Values in the chapter 10.1
Note
This command is only used for Category 2 device.
11 AVRCP Controller Indication Definition
This chapter introduces the AVRCP(Controller Role) relevant indications’
definition.
11.1 AVRCPSTAT
The AVRCPSTAT indication is used to inform the host unit when the AVRCP
Controller’s is changed.
Barrot Confidential