Programming Manual

68 / 139
i480e&i480e-MD2 Programming Manual
Response
AT-B PBCCONN [status],[bd]
Parameters
bd
Remote Bluetooth device address.
status
Values in the chapter 12.1.
Note
HFP connection must have already been established before
establishing PBAP connection.
12.3 PBCDISC
The PBCDISC command is used to release the PBAP connection with a remote
device.
Command
AT+B PBCDISC [bd]
Response
AT-B PBCDISC [status], [bd]
Parameters
bd
Remote Bluetooth device address.
status
Values in the chapter 12.1.
Note
N/A
12.4 PBCPULLPB
The PBCPULLPB command is used to start pulling the phonebook object from the
remote device.
Command
AT+B PBCPULLPB [repository],[folder],[maxList],[startOffset]
Response
Succeeded: AT-B PBCPULLDATAIND [pbSize], [moreData],
[length],[packet]0xFF
Failed: AT-B PBCPULLPB 1
Parameters
repository
1: local;
2: SIM card.
folder
1: pb, main phone book;
2: ich,incoming calls;
3: och,outgoing calls;
Barrot Confidential