Programming Manual

i480e&i480e-MD2 Programming Manual
87 / 139
18.4 PINRES
The PINRES command is input paring PIN code or passkey when HID profile is
enabled.
Command
AT+B PINRES[pin_code]
Response
AT-B PINRES [result_code]
Parameters
pin_code
PIN code
result_code
0 : success;
1: command disallowed;
2: parameter error;
3: authencation failed;
Note
If HID keyboard is enabled, when the module is pairing with the HID
host, it should call the PINRES command to input PIN code or
passkey
If HID mouse is enabled, when the module is pairing with Bluetooth
3.0 HID host, it does not need to input PIN code; when the module is
pairing with Bluetooth 2.0 HID host, it needs to input the fixed PIN
code 0000.
18.5 Keyboard Input/Output Report
The HIDIRPT command is used to send input report when the module is in the
report mode.
Command
AT+B HIDIRPT [len], [(raw_data)]
Indication
Succeeded：AT-B HIDIRPT 0
Failed：AT-B HIDIRPT 1
Parameter
len
Data length
raw_data
Format definition as follows:
Barrot Confidential