User's Guide

TECH1000 User Guide R.59.0 2019
6 | P a g e
BEFORE GETTING STARTED
1. Charging
NOTICE: Only use the power supply that is included in the TECH1000 tool kit to charge this tool. The
use of un-approved power supplies may damage it and will void the tool warranty.
2. Registration
The Bartec TECH1000 can be registered at https://tools.bartecautoid.com/ . Follow the on-screen
prompts filling in the information and tool serial number. A valid serial number and supplier is required
to process the registration, which can take up to 24hrs once submitted.
3. Update
Once the tool is registered, verify the software level loaded to the level available online and update
the tool if necessary.
KIT COMPONENTS
The TECH1000 kit inside the tool box includes:
Identifying Kit Components and Features
The TECH1000 tool is battery operated and generates a low-frequency magnetic field to activate tyre sensors.
It receives UHF radio signals from the tyre sensors typically at 434MHz.
• TPMS activation tool
• OBD
• USB cable
• Universal charger