User Manual - Original 10.1" Tablet PC Agile X IS Type 17-A1B*-****/******** ATEX / IECEx Zone 0 ATEX / IECEx Zone 1 UL Class I Division 1 Document No.: XX-XXXX-XXXX Status: 3. January 2017 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. Content Page English 1-xx GmbH Max-Eyth-Straße 16 97980 Bad Mergentheim GERMANY Phone: +49 7931 597-0 Fax: +49 7931 597-119 Support: support-antares@bartec.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Contents 1. Basic safety information ...................................................................................................................... 1 1.1 Information on this user manual ....................................................................................... 1 1.1.1 Languages ........................................................................................................................ 2 1.1.2 Changes in the document.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Contents 5. Transport and storage ........................................................................................................................ 26 5.1 Transport ........................................................................................................................ 26 5.2 Storage ........................................................................................................................... 26 6.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Basic Safety Information 1. Basic safety information 1.1 Information on this user manual Read carefully before putting the devices into operation. The user manual is a fixed part of the product. It must be kept in the direct vicinity of the device and the installation, operating and service staff must have access to it at all times.
.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 1.1.1 Basic Safety Information Languages The original User Manual with safety information is written in English. All other available languages are translations of the original User Manual. The User Manual is available in German and English. If further languages are required, these must be requested from BARTEC or stated on placing an order. 1.1.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Basic Safety Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, including interference that may cause undesired operation of the device 1.2.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Basic Safety Information CAUTION - PRUDENCE CAUTION The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Basic Safety Information 1.4 Intended use 1.4.1 Exclusive purpose The Tablet PC series is a handheld piece of electrical equipment. It serves the purpose of the mobile recording, processing and/or radio transmission of data within potentially explosive atmospheres. It is used exclusively in combination with devices which comply with the requirements placed on the overvoltage category I.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 1.7 Basic Safety Information Maintenance The pertinent erection and operating provisions for electrical systems must be observed! (E.g. Directive RL 2014/34/EU, BetrSichV and nationally applicable ordinances EN 6007914, IEC 60079-14 and the series DIN VDE 0100)! Observe the national waste disposal regulations when disposing of the devices. 1.7.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Basic Safety Information Our “General Terms and Conditions of Sale and Delivery” shall apply in principle. These shall be made available to the operator on signing of contract at the latest. Warranty and liability claims in the case of injury and damage to property shall be excluded if they are attributable to one or several of the following causes: Unintended use of the Tablet PC.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 1.11 Basic Safety Information Definition of terms A few abbreviations are used in the documentation. 1.12 IS = Intrinsically Safe => is used a generic term for the Zone 0, Zone 1 and Division 1 version NI = stands for the entire explosion-protected product series Configuration The devices are only supplied with preinstalled operating system. Windows 10 IoT Windows Embedded 8.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Product description 2. Product description 2.1 Agile X IS The Agile X IS is a tough Tablet PC with 10.1" display, which has been designed for use in the industrial environments and especially developed by BARTEC for use in potentially explosive atmospheres. 2.2 Structure 2.2.1 Front side Subject to technical changes.
Product description 2.2.2 2.2.3 10/50 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Rear side No Description 8 External I/O ports under protective cover Charging (DC), USB 2.0 (intrinsically safe), Micro SD slot and Micro SIM Card slot 9 Volume (+/-) 10 Function key 11 Expansion port (incl.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 2.3 Product description Purpose of use The Tablet PCs Agile X IS is a handheld electrical devices. They serve the purpose of entry, processing and (radio) transmission of data within potentially explosive atmospheres. The Tablet PC Agile X IS is used exclusively in combination with devices which comply with the requirements placed on the overvoltage category I.
Explosion protection and 10.1" Tablet PC - Agile X IS approvals Type 17-A1B*-****/******** 3.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Explosion protection and approvals UL Class I, Division 1 and Class I Zone 0 / 1 UL Class I Division 1 Type: Labelling Class I, Division 1, Groups A, B, C and D; 17-A1B1-****/******** 17-A1B4-****/******** 17-A1B6-****/******** UL Zone 0 Type: UL Zone 1 Type: Subject to technical changes.
Explosion protection and 10.1" Tablet PC - Agile X IS approvals Type 17-A1B*-****/******** 3.
10.
Technical data 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 4. Technical data 4.1 Features 4.1.1 Performance features 4.1.2 Processor Intel Pentium N3710 QuadCore 1.6GHz 1.6-2.56 GHz Clock Speed 14 nm for low power consumption Operating system Windows 10 IoT Enterprise Windows Embedded 8.1 Industry Pro – 64 Bit RAM 8 GB Main memory 128 GB (standard version) I/O ports at the Tablet PC 1 x USB 2.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Technical data Keys on front side - 4.1.3 4.1.
Technical data 4.1.5 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Voice and data transmission Bluetooth Dual Wi-Fi and Bluetooth connections are realised with the assistance of the WiFi and Bluetooth integrated module 4.1.6 WiFi IEEE 802.11a/b/g/n/ac WiFi compliant Bluetooth 4.1 (Low Energy) Antenna Internal Data transmission Wi-Fi and Bluetooth Dual Wi-Fi and Bluetooth connections Wi-Fi (2.4GHz) RF specification WLAN standard IEEE 802.11a/b/g/n/ac Frequency range - 2.400 GHz ~ 2.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Technical data Bluetooth specification Bluetooth std. Bluetooth V4.1 of 1,2, and 3 Mbps. Antenna reference Small antennas with 0~2 dBi peak gain Frequency band 2402 MHz ~ 2480 MHz Number of channels 79 channels Modulation FHSS, GFSK, DPSK, DQPSK RF specification Maximum input level 4.1.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Technical data 4.1.8 Symbologies supported 4.1.9 Decode range 4.1.10 NFC options The maximum read/write ranges of the NFC reader will depend on the different ambient conditions. For example: - 20/50 Transponder (tag), size Aerial used in the tag (size, model ...) Site of installation (metal, wood or other base) Ambient conditions External magnetic influences Temperature Humidity Subject to technical changes.
10.
Technical data 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 4.2 4.3 Battery The life of the battery will depend on different use factors and the device settings, e.g.: Use and setting of WLAN / Bluetooth Background lighting brightness level/screensaver Power management settings Use and setting of 1D-/2D-Imager, 4G/LTE module, Add-on module and camera Battery (only replaceable in safe range) Build in 7.4 V / 4,200 mAh Hot-swappable 2nd battery (optional) 7.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 4.5 Technical data Product labelling Laser warning - Type Label Zone 0 With scanner Type: Label comes from Winmate 17-A1B6-****/*****1** Without scanner Type: Label comes from Winmate 17-A1B6-****/*****0** Subject to technical changes.
Technical data 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Laser warning - Type Label Zone 1 With scanner Type: Label comes from Winmate 17-A1B4-****/*****1** Without scanner Type: Label comes from Winmate 17-A1B4-****/*****0** External battery type 17-A1Z0-0006 USB Stick 8 GB type 17-A1Z0-0007 Micro SD card type 17-A1Z0-0008 type 17-A1Z0-0009 and type 17-A1Z0-0010 Microsoft Windows Licence 24/50 Subject to technical changes.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 4.6 Technical data Laser labels The accessible laser radiation is in the visible spectral range (630nm to 680nm). It is not dangerous to the eye for short term exposure (up to 0.25 s). NB: In the case of laser devices of class 2, the eye is not in danger from incidental short term exposure to laser radiation, i.e. radiation exposure up to 0.25 s.
Transport and storage 10.1" Tablet PC - Agile X IS Type 17-A1B4-1..1/2221…. 5. Transport and storage 5.1 Transport Report any transport damage or incomplete deliveries immediately after receipt in writing to the forwarding company and BARTEC GmbH. Any damage caused through incorrect storage shall not be covered by the warranty provisions of BARTEC GmbH. 5.2 Storage ATTENTION Property damage through incorrect storage! Observe storage temperatures. Keep humidity away from the Tablet PC.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 6. Commissioning Commissioning DANGER Avoid electrostatic charging in potentially explosive atmosphere. Danger to life in explosive atmosphere! Do not dry wipe or clean the devices. Wear suitable clothing and shoes. Do not use rubber gloves or similar. DANGER Unintended use endangers explosion protection. Danger to life in explosive atmosphere! Do not make any changes to the 10.1" Agile X IS Tablet PC.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Commissioning 6.2 Requirements in potentially explosive atmosphere Tablet PC The Tablet PC may not be opened. Do not use, swap or replace and non-specified components. Do not retrofit any components to the internal plugs or slots. One exception is the port for SIM card and the port for the Micro SD card.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 6.3 Commissioning Handling accessories DANGER Non certified accessories endanger explosion protection. Danger to life exists in potentially explosive atmospheres! Only use original accessories from BARTEC Only permitted outside the potentially explosive atmosphere: Charge battery. Insert/remove Add-on modules 6.4 First steps The individual steps are explained in detail in the following chapters! 1. Unpack the Tablet PC. 2.
Commissioning 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Work steps: 1. Place the Agile X IS with the front side (display facing down) on a flat surface. 2. Before the battery can be inserted, the two-step unlocking device (a) of the battery compartment must be open. 3. Please make sure that both latches are locked in place in the outer position (red marking in the unlocking device becomes visible). 4.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Commissioning 8. Press the battery into the battery compartment until you hear a click (e). 9. 6.4.3 Slide the latches into the unlocked position (f). Insert USB stick Only the BARTEC USB stick (Type 17-A1Z0-0027) is to be used for data exchange (via the USB port) in potentially explosive atmospheres. Subject to technical changes.
Commissioning 6.4.4 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Insert SIM card The Tablet PC has a replaceable micro Sim Card slot. DANGER Non-certified accessories endanger explosion protection. Danger to life exists in potentially explosive atmospheres! The ignition protection is rendered ineffective by using modules from other manufacturers so that a danger of fire or explosion exists.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 6.4.5 Commissioning Insert micro SD card ATTENTION Damage to the micro SD card through electrostatic discharges! User antistatic mat. Ensure that the operator is correctly earthed. A maximum of 32 GB are supported.
Commissioning 6.4.6 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Remove/replace screen protector DANGER Non-certified accessories endanger explosion protection. A danger to life exists in a potentially explosive atmosphere! A condition for a safety conscious operation is the use of original screen protectors which have been specified for use by BARTEC.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 6.5 Commissioning HART Add-On Module (for future use) The intrinsically safe combination of the Agile X IS tablet PC system and the HART Add-On Module makes it possible to perform diagnostics, set parameters and manage field devices much more quickly and efficiently. The HART module is used as an add-on module for the Agile X IS tablet PC system in its extension interface.
Commissioning 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** DANGER The extension interface of the tablet PC must always be sealed in a potentially explosive atmosphere! There is a risk of explosion! Only remove or mount the cover of the extension module outside the potentially explosive atmosphere. Only assemble/dismantle the HART Add-On Module outside the potentially explosive atmosphere. Risk of short circuiting if the screws supplied with delivery are not used.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Commissioning Work steps: 1. Shut the tablet PC down using the operating system. 2. Place the tablet PC on the display side, taking care that no parts nearby scratch the screen. 3. Remove the top middle screws on the I/O interface cover. 4. Unpack the HART Module (the srews supplied for mounting are in the packaging). 5. Place the HART Add-On Module on the extension interface. Fasten the HART Add-On Module using 5 screws. Torque value 3 Nm.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Commissioning 6.5.5 Zubehör Schultergurt/4-Punkt Tragegurt 6.5.6 Setting up/activating the HART Add-On Module Switching the tablet PC on. Press the ON/OFF button for three seconds. Activating the HART Add-On Module. (1) Click on "Hottab" on the start screen to start the application. (2) Click in the menu on the option "Device ON/OFF". (3) Select "Ext.Module" to active the extension interface. (orange = ON; White = OFF) (4) Power set to ON.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Commissioning 1. If the driver for the virtual COM port is not listed in the tablet PC’s system image, a new "CP2109 USB to UART Bridge Controller" device will appear under "Other devices" in the device manager once the HART Add-On Module has been mounted. 2. Download the driver from: http://automation.bartec.de/ 3. Unzip the zip file. 4.
Commissioning 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 1. Accept the licence conditions by clicking on "I accept this agreement" and confirm by clicking on "Next". 7. The "The Drivers were successfully installed on this computer" message appears in the window. Complete installation by clicking on "Finish". 8.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Subject to technical changes.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Operation 7. Operation The operator using an electric system in a potentially explosive environment must keep the accompanying operation equipment in good condition, operate and monitor it correctly and conduct the requisite services and repairs. Before operation the devices it must be checked that all components and documents are available. 7.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Battery 7.2.2 Operation Change battery regularly. Discharge and charge battery regularly (every 3 months). For long term storage, remove the batteries from the Tablet PC and store in a cool environment at around 0 °C to +10° C and with a charge state of approximately 40-50 %. Once a charge state of approximately 5 % has been reached, it is recommended that the battery be recharged.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Operation Enclosure With alcohol cleaning cloths. and With alcohol cleaning cloths. With alcohol cleaning cloths. Avoid collections of fluid and rub with smooth cloths. Scanner window Use cleaning agent for optical devices. Battery contacts Remove the battery from the device to clean. Soak the cotton swabs in an alcohol solution to remove all grease and dirt deposits on the contacts. Repeat cleaning several times.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Operation 7.3 Operation, recommendations and requirements 7.3.1 Basic safety and health protection requirements Consult your local health and safety officer to ensure that you are acquainted with the safety regulations in your company which serve to protect employees at the workplace. 7.3.1.1 Ergonomic recommendation The following recommendations should be considered for everyday work at the workplace: 7.3.1.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Operation Road traffic safety Do not take any notes and do not use the device when driving. Making a list of to-dos or browsing through the address book when driving has a negative effect on safe driving. When driving on the road, you must primarily think of your safety and that of other road users. You should therefore concentrate completely on the road.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 7.3.2 Operation Information on the use of wireless devices Heed all warnings referring to the use of wireless devices. 7.3.2.1 Safety in aircraft Switch off the wireless device when asked to do so by the ground staff and by employees of the airline. If your device has a flight mode or similar function, find out about its correct use with the help of the aircraft staff. 7.3.2.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Operation 7.3.3 Equipment of the laser devices CAUTION Laser radiation! May damage eyesight! Do not look into the laser beam. Devices from BARTEC equipped with lasers comply with the following guidelines: IEC 60825-1:2007 / EN 60825-1:2008-05 Class 2 (1 mW, 630-680 nm) IEC 60825-1 / EN 60825-1: Class 1 LED product (only with imaging option, no laser label) The Tablet PC uses the ZEBRA SE4500 barcode reader.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 7.4 Operation Operating frequency - FCC and IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150 -5250 MHz band is restricted to Indoor Use Only; any other use will make the operation of this device illegal.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Operation Declaration in accordance with the FCC regulations, Part 15.21 Changes which have not been explicitly approved by the party responsible for compliance with the regulations can lead to the expiry of the operating authorization for this device. Radio transmission devices (Part 15) This device satisfies the requirements of Part 15 of the FCC Guidelines.
10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Operation Radio transmitters for RLAN devices The operation of RLAN devices (5 GHz) is subject to the following restrictions in Canada: Frequency range restricted to 5.60 GHz to 5.65 GHz. This device complies with the radio standard RSS 210 of the Industry & Science Canada.
Service, inspection and repair 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 8. Faults and troubleshouting DANGER Danger to life exists in potentially explosive atmospheres! Examine defective devices and any accessories only outside the potentially explosive atmosphere. 8.1 Troubleshooting Problem Solution The battery does not charge. Check that the external power supply is connected and that the replaceable battery is inserted correctly. No image on the display.
10.1" Tablet PC - Agile X IS Type 17-A1B*-1***/******** 8.2 Service, Inspection and Repair Problem Solution The GPS is very inaccurate. When using the GPS we recommend that the 1D/2D imager be deactivated to avoid faults. There is no sound from the loudspeaker. Check the volume setting with the buttons for high and low. When using external audio devices check whether the cable has been connected correctly. The display of the Tablet PC cannot be displayed on an external monitor.
Service, inspection and repair 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** 4. Select the Recovery option and continue. 5. A warning appears that all data will be lost. Ensure that all data are backed up. Where necessary, abort with No and conduct a data backup first. Only select Yes if you are certain that all data are secure. 6. Wait until the recovery process has been completed. A command window appears during the recovery and shows the progress of the recovery.
10.1" Tablet PC - Agile X IS Type 17-A1B*-1***/******** 9. Service, Inspection and Repair Service, inspection and repair Service, inspection, and repair of Tablet PCs may be conducted exclusively by trained and qualified staff! The staff who is familiar with the service, inspection, and repair of the Tablet PCs, has been informed about the risks and has the qualifications necessary for this work. 9.1 Service intervalls DANGER Prevent electrostatic charging in potentially explosive atmospheres.
Repair, Disposal and Packaging 10.1" Tablet PC - Agile X IS Type 17-A1B*-1***/******** Please read through the handling guidelines for the RMA process before you send in a defective device for repair. Then complete the RMA form (Return Merchandise Authorization), sign it and send it to our “Returns Centre”. E-Mail: services@bartec.de Fax: +49 7931 597-119 We cannot guarantee the processing within the contractually agreed period for any returns received by us without RMA number.
10.1" Tablet PC - Agile X IS Type 17-A1B*-1***/******** 12. Accessories Additional Information Accessories Ex-certified Description Order number Replacement battery Hot-swappable external battery (7.4 V / 4,200 mAh) ATEX/IECEx /UL 17-A1Z0-0006 Further accessories Spare stylus 1 piece per pack with rubber strap suitable for capacitive touch screen with anti-scratch rubber tip 03-9849-0149 Screen protector ATEX/IECEx cerified for gas groups IIA, IIB and IIC 1 piece per pack 10.
Accessories and additional information 14. 58/50 10.1" Tablet PC - Agile X IS Type 17-A1B*-****/******** Declaration of Conformity Subject to technical changes.
10.1" Tablet PC - Agile X IS Type 17-A1B*-1***/******** Subject to technical changes.