User's Manual

Commissioning
10.1" Tablet PC - Agile X IS
Type 17-A1B*-****/********
30/50
Subject to technical changes.
12/2016
Work steps:
1. Place the Agile X IS with the front side (display facing down) on a flat surface.
2. Before the battery can be inserted, the two-step unlocking device (a) of the
battery compartment must be open.
3. Please make sure that both latches are locked in place in the outer position (red
marking in the unlocking device becomes visible).
4. Insert the battery (b) with the charging contacts firstly into the battery
compartment.
5. The battery charging contacts (c) must be consistent with the charging contacts
in the battery compartment.
6. Press the battery into the clamp position until you hear a click.
7. Slide the latches to the middle position (d).