User's Manual

Commissioning
10.1" Tablet PC - Agile X IS
Type 17-A1B*-****/********
32/50
Subject to technical changes.
12/2016
6.4.4 Insert SIM card
The Tablet PC has a replaceable micro Sim Card slot.
DANGER
Non-certified accessories endanger explosion protection.
Danger to life exists in potentially explosive atmospheres!
 The ignition protection is rendered ineffective by using modules from other
manufacturers so that a danger of fire or explosion exists.
Only admissible outside potentially explosive atmospheres:
 The Sim Card may only be replaced outside the potentially explosive atmosphere!
 The EGB information should be followed in order to prevent any damage to the
Tablet PC. This includes working on an antistatic mat. The operator must also be
correctly earthed. (EGB = Rules in the handling of electrostatically endangered
construction elements and assemblies.)
ATTENTION
Incorrect handling can lead to material damage!
 Switch off the Tablet PC before replacing components.
 Turn off the Tablet PC before removing the battery. Errors when removing the
battery may lead to a loss of data.
Work steps:
Only insert or remove the micro SIM Card outside the potentially explosive atmosphere.
Switch off the Tablet PC using the Power button.
1. Remove the battery.
2. Place the Tablet PC on the display side. Ensure that no parts lying about scratch the
display.
3. Open the cover above the I/O interfaces (a).
4. Insert the micro SIM Card and push it in with the
contacts facing upwards into the micro SIM card
compartment (b) until it locks in.
5. Close the cover of the I/O interface.
6. Insert the battery.
7. Switch on the Tablet PC using the Power button.
8. Start up the Tablet PC and check whether the SIM Card has been recognised in the
system control.