User's Manual

10.1" Tablet PC - Agile X IS
Type 17-A1B*-****/********
Commissioning
Subject to technical changes.
12/2016
33/50
6.4.5 Insert micro SD card
ATTENTION
Damage to the micro SD card through electrostatic discharges!
 User antistatic mat.
 Ensure that the operator is correctly earthed.
 A maximum of 32 GB are supported.
 BARTEC offers the following micro SD cards:
8 GB order number 17-A1Z0-0008
16 GB order number 17-A1Z0-0009
32GB order number 17-A1Z0-0010
Work steps:
Only install or replace the micro SD card outside of the potentially explosive atmosphere.
Only use micro SD cards which have been tested and certified by BARTEC for this
purpose.
1. Switch off the Tablet PC using the Power button.
2. Place the Tablet PC on its front (display facing downwards).
3. Open the cover above the I/O interfaces (a).
4. Push in the micro SD card with the contacts facing upwards into the micro SD card
compartment (b) until it locks in.
5. Close the cover of the I/O interface.
6. Switch on the Tablet PC using the Power button
7. Check whether the micro SD card has been recognised and is available in system
control or in the file explorer.