User's Manual

10.1" Tablet PC - Agile X IS
Type 17-A1B*-1***/********
Service, Inspection and
Repair
Subject to technical changes.
12/2016
55/50
9. Service, inspection and repair
Service, inspection, and repair of Tablet PCs may be conducted exclusively by trained
and qualified staff! The staff who is familiar with the service, inspection, and repair of the
Tablet PCs, has been informed about the risks and has the qualifications necessary for
this work.
9.1 Service intervalls
DANGER
Prevent electrostatic charging in potentially explosive atmospheres.
Danger to life in explosive atmosphere!
 Do not dry wipe or dry clean devices.
The mechanical state of the device should be regularly checked. The service intervals will
depend on the ambient conditions. We recommend that a service be conducted at least
once a year. Regular servicing is not necessary if the device is correctly operated in
accordance with the installation instructions and under appropriate consideration of the
ambient conditions.
9.2 Inspection
According to EN/IEC 60079-17 and EN/IEC 60079-19, the owner/operator of electrical
plants in potentially explosive atmospheres is obliged to have these plants checked by an
electrician to ensure that they are in a correct condition.
9.3 Service and repair work
In addition to the standards EN/IEC 60079-17 and EN/IEC 60079-19 also apply to the
servicing and repair as well as the testing of accompanying operating devices.
Work connected with assembly/dismantling, operation and servicing may only be
conducted by trained specialists. All statutory requirements and other binding guidelines
on occupational health and safety, accident prevention and environmental protection must
be observed.
9.3.1 Information on sending in for repairs (new picture of the device)
The following information is required for the repair:
 Serial number of the device,
see label for series number (1)
 Model number or product name,
see type plate (2)
 Software type and version number from
the system information in system control