User's Manual

Mobile Computer MC 92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Product description
Subject to technical changes.
04/2013
1.3 Duties of the operator
The operator undertakes to only permit persons to work with the Mobile Computers who
 are acquainted with the basic regulations on safety and accident prevention, and who
have been inducted in the use of the Mobile Computer;
 have read and understood the documentation, the safety chapter and the warnings.
The operator checks that the safety and accident prevention regulations applicable to the
respective case of use have been observed.
1.4 Safety information
1.4.1 General safety information
 Do not dry wipe or clean devices in potentially explosive atmospheres!
 Do not open devices in potentially explosive atmospheres.
 General statutory provisions or guidelines on occupational health and safety, accident
prevention provisions and environmental protection laws must be heeded, e.g.
Operational Safety Ordinance (BetrSichV) and nationally applicable ordinances.
 Use suitable clothing and shoes with respect to the danger of hazardous electrostatic
charges.
 Avoid heat influences outside the specified temperature range.
 Protect device from external influences! Do not expose device to caustic/aggressive
liquids, vapours or spray. In the case of malfunction or damaged enclosure, remove
the device immediately from the potentially explosive atmosphere and bring it to a
safe place.
1.5 Maintenance
The pertinent erection and operating provisions for electrical systems must be observed!
(e.g. Directive 99/92/EC, Directive 94/9/EC, BetrSichV and nationally applicable
ordinances EN 60079-14 and the series DIN VDE 0100)!
Observe the national waste disposal regulations when disposing of the devices.
1.5.1 Servicing
No constant servicing will be necessary if operated correctly under consideration of the
assembly instructions and environmental conditions. See Chapter “Service, inspection,
repair” in this respect.
1.5.2 Inspection
According to EN 60079-19 and EN 60079-17, the operator of electrical systems in
potentially explosive atmospheres is obliged to have these inspected by an electrician to
ensure correct condition.