User's Manual

Mobile Computer MC 9090
ex
Page 35
4.3.3 Power supply
Use only the power packs approved by BARTEC/Motorola (50-14000-148, 12 Vdc and at least 3,33 A). The power pack is
certified in accordance with EN60950-1 and has SELV outputs.
The use of other power packs invalidates the permits granted for these devices and can be dangerous.
4.3.4 Charging the Battery
Make sure that the accessory part used for charging the battery is connected to a suitable power source.
Insert the battery into the cradle or charging station. As a rule the battery will recharge completely in less than 8 hours.
When the yellow LED is on and steady, the battery has finished charging.
LED Status
LED Description
Yellow light flashes slowly
The Mobile Computer is recharging.
Steady yellow light The charging process has finished.
Note:
If the battery is inserted into the Mobile Computer for the first time, the
yellow LED will flash once if the battery has a low charging state or is not
inserted completely.
Doesn’t light up The Mobile Computer is not in the cradle. The Mobile Computer has not
been inserted correctly. There is no power supply to the charger.
Yellow light flashes in quick
succession
Charging error, check the position of the Mobile Computer.