User Manual

Safety
Technical data subject to change without notice.
Issue 01/2010
The user manual is a constituent part of the product and must be kept in
the direct vicinity of the device and accessible at all times to installation,
operating and maintenance personnel.
It contains important notes, safety instructions and test certificates which
are necessary for perfect functioning when the devices are being
operated and handled. It is written for technically qualified personnel.
Familiarity with and the technically perfect implementation of the safety
instructions and warnings described in this manual are preconditions for
safe installation and commissioning. The safety notes and warnings
given in this documentation are given in a general way and only qualified
personnel will have the necessary specialized know-how to interpret and
implement them correctly in specific cases.
Qualifications of the personnel working with the devices
The user manual is written for all people who carry out assembly,
installation, commissioning and service work on the product, whereby
the directives and standards must be observed.
For Europe:
99/92/EC, EN 60079-17, EN 60079-19 for the gas area
EN 61241-17 and EN 61241-19 for the dust area
For North America:
NEC 500.
For other countries or regions:
National directives and standards must be observed.
Changes to the document
BARTEC reserves the right to alter the contents of this document without
notice. No guarantee is given for the correctness of the information. In
case of doubt the German safety instructions shall apply because it is
not possible to rule out errors in translation or in printing. In the event of
a legal dispute, the “General Terms and Conditions” of the BARTEC
group shall apply in addition.
The respective up-to-date versions of data sheets, manuals, certificates,
EC Declaration of Conformity may be downloaded from the “Ex
Visualization and Communication Systems” product page at
www.bartec-group.com
or ordered directly from BARTEC GmbH.
Notes on this manual
Read carefully
before putting
the devices
into operation.