User's Manual

Mobile Computer MC92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Technical Data
Technical data subject to change without notice.
Revision D / Status 10/2016
21/73
3.4.8 Data Capture Options
Five available configuration
possibilities
–
1D-Standard-Range Laser Scanner
(SE965)
– 1D-Long-Range Laser Scanner
Lorax SE1524)
– 1D-/2D-Imager
(Blockbuster SE4500-SR)
– 1D-/2D-Imager DPM
(Direct Part Marking)
(Blockbuster SE4500-HD)
Only for NI Version
– 1D-/2D-Long Range Imager
(SE4600-LR)
The various scan engines maximum ranges depend on the bar code symbology/type and
the module width (in mil) used.
3.4.8.1 1D- Standard-Range Laser Scanner (SE965)
SE965 1D scan engine decodes/reads 1D barcodes/symbols.
For MC92N0
ex
-K (Brick) and MC92N0
ex
-G (Gun) versions:
Further detailed information on the SE965 can be found in the “User Manual“ or “Integrator
Guide” from Zebra Solutions.
The decode range depends on the quality and size of the bar code and on the scan
engine’s software setting.
Laser class
CDRH Class II / IEC Class 2
Decode range
with Code 39, 55 mil
up to approx. 2.5 m
up to approx. 100 inch
Optical resolution
0.005 inch - minimum element width
Skew
± 40° from the vertical
Pitch
± 65° from the starting position
Roll
± 50° from the vertical
Ambient light immunity
86,111 lux
Scan rate
104 (± 12) scans/sec. (bi-directional)
Scan angle
47° ± 3° far range
35° ± 3° medium distance
10° ± 3° near range
Laser energy at 650 nm
1.7 mW peak