User's Manual

Mobile Computer MC92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Technical Data
Technical data subject to change without notice.
Revision D / Status 10/2016
23/73
3.4.8.4 1D-/2D-Imager DPM (Blockbuster SE4500-HD)
SE4500-HD 1D/2D Imager Engine with DPM decodes/reads a wide range of DPM
markings on metal, plastic and glass surfaces, including dot peening, laser etching,
casting, stamping or moulding.
For MC92N0
ex
-G (Gun) and MC92N0
ex
-K (Brick) versions:
Further detailed information on the Blockbuster SE4500-HD can be found in the “User
Manual“ or “Integrator Guide” from Zebra Solutions.
The decode range depends on the quality and size of the bar code and on the scan
engine’s software setting.
Laser class
CDRH Class II / IEC Class 2
Decode range, near
with code 39, 3 mil
up to approx. 4.1 cm
up to approx. 1.6 inches
Decode range, far
with code 39, 3 mil
up to approx. 9.7 cm
up to approx. 3.8 inches
Focus distance
From the centre of the scanner window
SR --- 19 cm
Resolution
752 x 480 pixels HxV (grey phase)
Roll tolerance
360°
Pitch angle
± 60° from the starting position
Skew tolerance
± 60° from the starting position
Ambient light immunity
96,900 lux
Aiming LED (VLD)
655 Nm ± 10 nm
Exposure element (LED)
625 Nm ± 5 nm LEDs (2x)
Field of view
Horizontal 40 °
Vertical 25 °
3.4.8.5 1D-/2D-Imager (Blockbuster SE4750-SR)
SE4750-SR 1D/2D Imager Engine (omni-directional) decodes/reads 1D and 2D
barcodes/symbols
For MC92N0
ex
-G (Gun) and MC92N0
ex
-K (Brick) versions:
Further detailed information on the SE4750-SR Blockbuster can be found in the “User
Manual“ or “Integrator Guide” from Zebra Solutions.
The decode range depends on the quality and size of the bar code and on the scan
engine’s software setting.