User's Manual

Mobile Computer MC92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Operation
Technical data subject to change without notice.
Revision D / Status 10/2016
55/73
Laser devices of Class 2 work with a visible low volt light emitting diode. As for every
bright light source, for example the sun, you should not look directly into the light beam.
There is no information about the hazards of being briefly exposed to the laser light of a
laser scanner of Class 2.
The use of control elements, adjustments or the application of procedures which do not
comply with the instructions described here may lead to hazardous exposure to beams.
6.4.4 LED Devices
Complies with EN60825-1:2001 and EN 62471:2006.
6.4.5 Restrictions to wireless devices
The use of wireless devices is possibly forbidden or restricted. This applies primarily on
board aircraft, in hospitals, in the vicinity of explosive substances
or under other
hazardous conditions. If you a
re not sure which regulations apply to the use of the
device, ask permission before switching it on.
Radio Modules
The device contain approved radio module(s). These module(s) are identified below.
BARTEC/Zebra radio module supporting WLAN 802.11 a/b/g/n and Bluetooth.
Type(s): 21-148603-0B
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more information or to view End Product
Listing, please visit https://www.bluetooth.org/tpg/listings,cfm
Country-specific roaming
This device has the International Roaming function (IEEE802.11d) which ensures that the
device is used on the channels prescribed for the respective country.
Ad-hoc operation
The ad-hoc operation is restricted to the channels 36–48 (5150–5250 MHz). The use of
this bandwidth is restricted to indoor areas; use outdoors is not permitted.