User's Manual
Table Of Contents
- 1. Basic Security Information
- 2. Product Description
- 3. Technical Data
- 3.1 Explosion protection IS
- 3.2 Explosion protection NI
- 3.3 Other applicable standards
- 3.4 Features
- 3.4.1 Performance features
- 3.4.2 Physical features
- 3.4.3 User environment
- 3.4.4 Application development
- 3.4.5 Voice and data transmission Wireless LAN
- 3.4.6 Voice and data transmission Wireless PAN
- 3.4.7 Headset
- 3.4.8 Data Capture Options
- 3.4.8.1 1D- Standard-Range Laser Scanner (SE965)
- 3.4.8.2 1D-Long-Range Laser Scanner (Lorax SE1524)
- 3.4.8.3 1D-/2D-Imager (Blockbuster SE4500-SR)
- 3.4.8.4 1D-/2D-Imager DPM (Blockbuster SE4500-HD)
- 3.4.8.5 1D-/2D-Imager (Blockbuster SE4750-SR)
- 3.4.8.6 1D-/2D-Imager (Blockbuster SE4750-MR)
- 3.4.8.7 1D-/2D-Long Range Imager (SE4600-LR)
- 3.4.9 Decodable barcode types
- 3.4.10 RFID/RuBee Option
- 3.4.10.1 LF Reader (internal module)
- 3.4.10.2 LF Reader (extended module)
- 3.4.10.3 HF Reader (internal module)
- 3.4.10.4 HF Reader (extended module)
- 3.4.10.5 UHF Reader (internal module)
- 3.4.10.6 UHF Reader (internal module + mounted antenna)
- 3.4.10.7 UHF Reader (extended module)
- 3.4.10.8 UHF Reader (extended module + mounted antenna)
- 3.4.10.9 RuBee Reader (extended module)
- 3.5 Battery
- 3.6 External interfaces
- 3.7 Product labelling
- 3.8 Laser labels
- 4. Transport and Storage
- 5. Commissioning
- 6. Operation
- 6.1 Final inspection
- 6.2 Handling
- 6.3 Care and cleaning
- 6.4 Operation recommendations and requirements
- 6.5 Frequency of Operation – FCC and IC
- 6.6 Electromagnetic fields
- 6.7 Optimise operating times/change energy settings (WEH 6.5.3 only)
- 6.8 Software versions
- 7. Faults and Troubleshooting
- 8. Service, Inspection, Repair
- 9. Disposal
- 10. Dispatch and Packaging Information
- 11. Accessories, Spare Parts
- 12. Additional Information
Operation
Mobile Computer MC92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
58/73
Technical data subject to change without notice..
Revision D / Status: 10/2016
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions:
− Restricted Band 5.60 – 5.65 GHz
This device complies with RSS 210 of Industry Canada. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux
appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
provoquer un fonctionnement indésirable.
Label Marking: The Term “IC:” before the radio certification only signifies that Industry
Canada technical specifications were met.
6.6 Electromagnetic fields
6.6.1 International
Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering human exposure
to electromagnetic fields from radio devices. For information on “International” human
exposure to electromagnetic fields refer to the BARTEC and Zebra Declaration of
Conformity (DoC) at
http://www.motorolasolutions.com/doc
For further information on the safety of RF energy from wireless devices – see
http://responsibility.motorolasolutions.com/index.php/downloads/
located under Wireless Communications and Health.
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use only BARTEC Zebra tested
and approved belt-clips, holsters, and similar accessories to ensure EU Compliance.