User's Manual
Table Of Contents
- 1. Basic Security Information
- 2. Product Description
- 3. Technical Data
- 3.1 Explosion protection IS
- 3.2 Explosion protection NI
- 3.3 Other applicable standards
- 3.4 Features
- 3.4.1 Performance features
- 3.4.2 Physical features
- 3.4.3 User environment
- 3.4.4 Application development
- 3.4.5 Voice and data transmission Wireless LAN
- 3.4.6 Voice and data transmission Wireless PAN
- 3.4.7 Headset
- 3.4.8 Data Capture Options
- 3.4.8.1 1D- Standard-Range Laser Scanner (SE965)
- 3.4.8.2 1D-Long-Range Laser Scanner (Lorax SE1524)
- 3.4.8.3 1D-/2D-Imager (Blockbuster SE4500-SR)
- 3.4.8.4 1D-/2D-Imager DPM (Blockbuster SE4500-HD)
- 3.4.8.5 1D-/2D-Imager (Blockbuster SE4750-SR)
- 3.4.8.6 1D-/2D-Imager (Blockbuster SE4750-MR)
- 3.4.8.7 1D-/2D-Long Range Imager (SE4600-LR)
- 3.4.9 Decodable barcode types
- 3.4.10 RFID/RuBee Option
- 3.4.10.1 LF Reader (internal module)
- 3.4.10.2 LF Reader (extended module)
- 3.4.10.3 HF Reader (internal module)
- 3.4.10.4 HF Reader (extended module)
- 3.4.10.5 UHF Reader (internal module)
- 3.4.10.6 UHF Reader (internal module + mounted antenna)
- 3.4.10.7 UHF Reader (extended module)
- 3.4.10.8 UHF Reader (extended module + mounted antenna)
- 3.4.10.9 RuBee Reader (extended module)
- 3.5 Battery
- 3.6 External interfaces
- 3.7 Product labelling
- 3.8 Laser labels
- 4. Transport and Storage
- 5. Commissioning
- 6. Operation
- 6.1 Final inspection
- 6.2 Handling
- 6.3 Care and cleaning
- 6.4 Operation recommendations and requirements
- 6.5 Frequency of Operation – FCC and IC
- 6.6 Electromagnetic fields
- 6.7 Optimise operating times/change energy settings (WEH 6.5.3 only)
- 6.8 Software versions
- 7. Faults and Troubleshooting
- 8. Service, Inspection, Repair
- 9. Disposal
- 10. Dispatch and Packaging Information
- 11. Accessories, Spare Parts
- 12. Additional Information
Mobile Computer MC92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Operation
Technical data subject to change without notice.
Revision D / Status 10/2016
59/73
US and Canada
Co-located statement
To comply with FCC RF exposure compliance requirement, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other
transmitter/antenna except those already approved in this filling.
Handheld Devices
This device was tested for typical body-worn operation. Use only BARTEC tested and
approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The
use of third-party belt-clips, holsters, and similar accessories may not comply with FCC
RF exposure compliance requirements, and should be avoided.
The MC92N0
ex
should only be worn on the body when switched off.
6.6.2 Handheld devices
To comply with the FCC guidelines for high frequency devices, the aerial of the transmitter
should be used in the direct vicinity of, or in an operation unit with, other
transmitters/aerials with the exception of those approved in this document.
SD card
The SD card slot provides a secondary, non-volatile memory. The slot is under the
keypad of the MC92N0
ex
. Further information is provided in the documentation supplied
with the card. Observe the manufacturer’s recommendations on use.