User's Manual
Table Of Contents
- 1. Basic Security Information
- 2. Product Description
- 3. Technical Data
- 3.1 Explosion protection IS
- 3.2 Explosion protection NI
- 3.3 Other applicable standards
- 3.4 Features
- 3.4.1 Performance features
- 3.4.2 Physical features
- 3.4.3 User environment
- 3.4.4 Application development
- 3.4.5 Voice and data transmission Wireless LAN
- 3.4.6 Voice and data transmission Wireless PAN
- 3.4.7 Headset
- 3.4.8 Data Capture Options
- 3.4.8.1 1D- Standard-Range Laser Scanner (SE965)
- 3.4.8.2 1D-Long-Range Laser Scanner (Lorax SE1524)
- 3.4.8.3 1D-/2D-Imager (Blockbuster SE4500-SR)
- 3.4.8.4 1D-/2D-Imager DPM (Blockbuster SE4500-HD)
- 3.4.8.5 1D-/2D-Imager (Blockbuster SE4750-SR)
- 3.4.8.6 1D-/2D-Imager (Blockbuster SE4750-MR)
- 3.4.8.7 1D-/2D-Long Range Imager (SE4600-LR)
- 3.4.9 Decodable barcode types
- 3.4.10 RFID/RuBee Option
- 3.4.10.1 LF Reader (internal module)
- 3.4.10.2 LF Reader (extended module)
- 3.4.10.3 HF Reader (internal module)
- 3.4.10.4 HF Reader (extended module)
- 3.4.10.5 UHF Reader (internal module)
- 3.4.10.6 UHF Reader (internal module + mounted antenna)
- 3.4.10.7 UHF Reader (extended module)
- 3.4.10.8 UHF Reader (extended module + mounted antenna)
- 3.4.10.9 RuBee Reader (extended module)
- 3.5 Battery
- 3.6 External interfaces
- 3.7 Product labelling
- 3.8 Laser labels
- 4. Transport and Storage
- 5. Commissioning
- 6. Operation
- 6.1 Final inspection
- 6.2 Handling
- 6.3 Care and cleaning
- 6.4 Operation recommendations and requirements
- 6.5 Frequency of Operation – FCC and IC
- 6.6 Electromagnetic fields
- 6.7 Optimise operating times/change energy settings (WEH 6.5.3 only)
- 6.8 Software versions
- 7. Faults and Troubleshooting
- 8. Service, Inspection, Repair
- 9. Disposal
- 10. Dispatch and Packaging Information
- 11. Accessories, Spare Parts
- 12. Additional Information
Mobile Computer MC92N0
ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Faults and
Troubleshooting
Technical data subject to change without notice.
Revision D / Status 10/2016
67/73
7.1.3 On a Windows Embedded Handheld 6.5.3 device
− A warm boot starts the MC92N0
ex
again and shuts down all running programs.
− A cold boot also restarts the MC92N0ex, but erases all stored records and entries in
RAM. In addition, some new drivers are installed
ATTENTION
Incorrect handling may cause damage to property!
Data stored in the flash memory or on a memory card is not lost. First perform a
warm boot. The MC92N0
ex
is re-started and all stored data records and entries are
preserved. If the MC92N0
ex
still does not respond after a warm boot, perform a
cold boot.
Any data previously synchronized with a computer can be restored during the next
ActiveSync operation.
7.1.3.1 Warm Boot
To perform a warm boot
1. Hold down the Power button for approximately five seconds. As soon as the
MC92N0
ex
starts to perform a warm boot release the Power button.
7.1.3.2 Cold Boot
ATTENTION
Incorrect handling may cause damage to property!
Performing a cold boot restores formats, preferences and other settings to the
default settings.
To perform a cold boot:
2. Press the red Power button. The PowerKey Action window appears.
3. Tap Safe Battery Swap.
4. Press the primary battery release on the MC92N0
ex
to partially eject the battery from
the MC92N0
ex
. (described in chapter 5.4.1 Insert battery)
5. While the battery is partially released, simultaneously press and release the handle
trigger and the Power button.
6. Push the battery to fully re-insert it in the MC92N0
ex
. One audible click can be heard
as the battery is fully inserted.
7. The MC92N0
ex
reboots.