User's Manual

Integration Manual
BARTEC
Blatt 2/9
1. Assembly Housing
1.1 BRICK
1) Drill 7 holes (1,0mm ) and 4 holes (5,5mm) with the
fixture in the lower housing.
Press 4 inserts into the big holes.
2) Lead the 7 wires (each with different colour) through the
drillings.
(LiY 0.08mm², d
iso
> 0.2mm)
3) Fill the RFID upper housing with Sikaflex as shown in
the picture.
4) Fix the RFID lower housing with 4 screws and 4
washers on the housing.
5) Seal the screw heads and the wire openings with
Sikaflex.